SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
O
O49
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: info@apem.com
SCHEMATIC MECHANICAL OUTLINE
P.C. BOARD LAYOUT
SCHEMATIC MECHANICAL OUTLINE
P.C. BOARD LAYOUT
SCHEMATIC MECHANICAL OUTLINE
P.C. BOARD LAYOUT
SPECIFICATIONS
Contact rating: 200 mA at 125 VAC or 30 VDC
Initial contact resistance: 30 milliohms max.
Contact timing: Non-shorting
Insulation resistance: 100 megohms max. at 500 VDC
Dielectric strength: 500 volts RMS at sea level
Electrical life: 10,000 cycles min.
Operating temperature range: -10°C to +60°C
Actuation force: 250g ± 100g
Solder heat resistance: 260°C max. for 3 seconds
Solvent washing permissible
FEATURES
1P3T
1P5T
1P6T
MODEL NO.
MSL33
MODEL NO.
MSL55
MODEL NO.
MSL66
Bifurcated wiping contact design.
Epoxy sealed terminals.
Wash-through open frame construction.
Reinforcing mounting legs.
Threaded mounting holes standard - 4-40NC-2B.
MATERIALS
Contacts & terminals: Silver plated
Housing: Tin/lead plated steel Actuator: Steel
Base: Phenolic laminated sheet
Slider: High temperature thermoplastic Terminal seal: Epoxy
VERTICAL ACTUATOR
VERTICAL ACTUATOR
VERTICAL ACTUATOR
.157 (4.00) TRAVEL/THROW
.157 (4.00) TRAVEL/THROW
.157 (4.00) TRAVEL/THROW
MSL Series
Single Pole Multi-Position
Slide Switches
Note: up to 10 positions available - contact factory.
Minimum quantities may apply.
