LTC2854/LTC2855
4
285455fc
For more information www.linear.com/LTC2854
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime. High temperatures degrade operating lifetimes.
Operating lifetime is derated at temperatures greater than 105°C.
Note 2: All currents into device pins are positive; all currents out of device
pins are negative. All voltages are
referenced to device ground unless
otherwise specified.
The l denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C, V
CC
= 3.3V, T
E
= 0V unless otherwise noted (Note 2).
Note 3: Maximum data rate is guaranteed by other measured parameters
and is not tested directly.
Note 4: This IC includes overtemperature protection that is intended
to protect the device during momentary overload conditions.
Overtemperature protection activates at a junction
temperature exceeding
150°C. Continuous operation above the specified maximum operating
junction temperature may result in device degradation or failure.
The l denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C, V
CC
= 3.3V, T
E
= 0V unless otherwise noted (Note 2).
ELECTRICAL CHARACTERISTICS
SWITCHING CHARACTERISTICS
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
Driver
f
MAX
Maximum Data Rate Note 3
l
20 Mbps
t
PLHD
, t
PHLD
Driver Input to Output R
DIFF
= 54Ω, C
L
= 100pF (Figure 4)
l
10 50 ns
Dt
PD
Driver Input to Output Difference
|t
PLHD
-t
PHLD
|
R
DIFF
= 54Ω, C
L
= 100pF (Figure 4)
l
1 6 ns
t
SKEWD
Driver Output Y to Output Z R
DIFF
= 54Ω, C
L
= 100pF (Figure 4)
l
1 ±6 ns
t
RD
, t
FD
Driver Rise or Fall Time R
DIFF
= 54Ω, C
L
= 100pF (Figure 4)
l
4 12.5 ns
t
ZLD
, t
ZHD
, t
LZD
, t
HZD
Driver Enable or Disable Time R
L
= 500Ω, C
L
= 50pF, RE = 0 (Figure 5)
l
70 ns
t
ZHSD
, t
ZLSD
Driver Enable from Shutdown R
L
= 500Ω, C
L
= 50pF, RE = V
CC
(Figure 5)
l
8 µs
t
SHDN
Time to Shutdown R
L
= 500Ω, C
L
= 50pF
(DE = ↓, RE = V
CC
) or (DE = 0, RE ↑)
(Figure 5)
l
100 ns
Receiver
t
PLHR
, t
PHLR
Receiver Input to Output C
L
= 15pF, V
CM
= 1.5V, |V
AB
| = 1.5V, t
R
and
t
F
< 4ns (Figure 6)
l
50 70 ns
t
SKEWR
Differential Receiver Skew
|t
PLHR
-t
PHLR
|
C
L
= 15pF (Figure 6)
l
1 6 ns
t
RR
, t
FR
Receiver Output Rise or Fall Time C
L
= 15pF (Figure 6)
l
3 12.5 ns
t
ZLR
, t
ZHR
, t
LZR
, t
HZR
Receiver Enable/Disable R
L
= 1k, C
L
=15pF, DE = V
CC
(Figure 7)
l
50 ns
t
ZHSR
, t
ZLSR
Receiver Enable from Shutdown R
L
= 1k, C
L
= 15pF, DE = 0V (Figure 7)
l
8 µs
t
RTEN
, t
RTZ
Termination Enable or Disable Time V
B
= 0V, V
AB
= 2V, RE = V
CC
, DE = 0V
(Figure 8)
l
100 µs
SYMBOL PARAMETER CONDITIONS MIN TYP MAX UNITS
I
CCT
Supply Current in Transmit Mode No Load, DE = V
CC
, RE = V
CC
, TE = 0V
l
450 1000 µA
I
CCTR
Supply Current with Both Driver and
Receiver Enabled
No Load, DE = V
CC
, RE = 0V, TE = 0V
l
450 1000 µA
I
CCTERM
Supply Current in Termination Mode DE = 0V, RE = V
CC
, TE = V
CC
l
110 180 µA
I
CCTERMR
Supply Current in Receive and
Termination Mode
DE = 0V, RE = 0V, TE = V
CC
l
450 950 µA
I
CCTERMT
Supply Current in Transmit and
Termination Mode
DE = V
CC
, RE = V
CC
, TE = V
CC
l
470 1000 µA
I
CCTERMTR
Supply Current with Driver, Receiver
and Termination Enabled
DE = V
CC
, RE = 0V, TE = V
CC
l
470 1000 µA
ESD Protection
ESD Protection for RS485/RS422 Pins A, B on LTC2854, Human Body Model
Y, Z, A, B on LTC2855, Human Body Model
±25
±15
kV
kV
