Narrow-pitch connectors
AXN(5/6)
PRODUCT TYPES
Note) Connectors are available in a standard embossed tape package (1,000 pcs/lot). Minimum ordering quantity is a single reel.
Samples for mounting confirmation: Available in units of 50 pieces. Please consult us. (See “Regarding sample orders to confirm proper mounting” on page 150.)
Samples: Small lot orders for the above models are possible.
SPECIFICATIONS
1. Characteristics
2. Material and surface treatment
DIMENSIONS (Unit: mm)
Mated height No. of contacts
Part No. Packing quantity
Socket Header Inner carton (1 reel) Outer carton
5.0 mm
20 AXN520045G AXN620585G
1,000 pcs. 2,000 pcs.
30 AXN530045G AXN630585G
40 AXN540045G AXN640585G
50 AXN550045G AXN650585G
60 AXN560045G AXN660585G
80 AXN580045G AXN680585G
100 AXN500045G AXN600585G
Item Specifications Conditions
Electrical
characteristics
Rated current 0.2A
Rated voltage 60V AC/DC
Breakdown voltage 150V AC for 1 min. Detection current: 1mA
Insulation resistance Min. 1000MΩ Using 500V DC megger
Contact resistance Max. 80mΩ
Based on the contact resistance measurement method specified by
JIS C 5402.
Mechanical
characteristics
Composite insertion force Max. 0.981N {100gf} × no. of contacts (initial)
Composite removal force Min. 0.0785N {8gf} × no. of contacts
Contact holding force Min. 2.94N {300gf}/2 contacts Measuring the maximum force. As the contact is axially pull out.
Environmental
characteristics
Ambient temperature –55°C to +85°C No freezing at low temperatures
Soldering heat resistance
Max. peak temperature of 245°C (on the surface
of the PC board around the connector terminals)
Infrared reflow soldering
300°C within 5 seconds Soldering iron
Thermal shock resistance
(header and socket mated)
5 cycles, insulation resistance min. 100MΩ,
contact resistance max. 80mΩ
Sequence
1. –55 °C, 30 minutes
2. ~ , Max. 5 minutes
3. 85 °C, 30 minutes
4. ~ , Max. 5 minutes
Humidity resistance
(header and socket mated)
120 hours, insulation resistance min. 100MΩ,
contact resistance max. 80mΩ
Bath temperature 40±2°C, humidity 90 to 95% R.H.
Saltwater spray resistance
(header and socket mated)
24 hours, insulation resistance min. 100MΩ,
contact resistance max. 80mΩ
Bath temperature 35±2°C, saltwarter concentration 5±1%
H2S resistance
(header and socket mated)
48 hours, contact resistance max. 80mΩ
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
SO2 resistance
(header and socket mated)
48 hours, contact resistance max. 80mΩ
Bath temperature 40±2°C, gas concentration 10±3 ppm,
humidity 90 to 95% R.H.
Lifetime
characteristics
Insertion and removal life 20 times Repeated insertion and removal speed of max. 200 times/hours
Unit weight
30 contacts; Socket: 0.19g Header: 0.32g
50 contacts; Socket: 0.29g Header: 0.50g
Part name Material Surface treatment
Molded portion Heat-resistant resin (UL94V-0) —
Contact/post Copper alloy
Contact portion: Ni plating on base, Au plating on surface
Ter minal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
0
–3
+3
0
The CAD data of the products with a CAD Data mark can be downloaded from: http://panasonic-electric-works.net/ac
• Socket
Dimension table (mm)
No. of
contacts
A B
20 7.40 4.50
30 9.90 7.00
40 12.40 9.50
50 14.90 12.00
60 17.40 14.50
80 22.40 19.50
100 27.40 24.50
A
B±0.1
C0.5
1.02
1.07
1.07
3.05
4.40
3.60
0.50±0.05
0.50±0.05
0.20±0.03
Suction face 1.80
Contact 60 0.10
Contact 60 0.12
General tolerance: ±0.2
Recommended PC board pattern
(TOP VIEW)
5.40
B±0.05
0.50±0.05
0.50±0.05
0.25±0.05
0.75±0.05
0.125±0.05
1.46±0.05
CAD Data
panasonic-electric-works.net/ac
