OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ILC0603ER6N8K

P1-P2
Document Number: 34145 For technical questions, contact: magnetics@vishay.com
www.vishay.com
Revision: 18-Apr-11 1
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
Surface Mount, Multi Layer High Frequency Ceramic Inductors
ILC-0603
Vishay Dale
MECHANICAL SPECIFICATIONS
Solderability: 90 % coverage after 5 s dip in 235 °C solder
following 60 s preheat at 120 °C and type R flux dip
Resistance to Solder Heat: 10 s in 260 °C solder, after
preheat and flux above
Terminal Strength: 0.3 kg (0.66 lbs) for 30 s
Beam Strength: 0.3 kg (0.66 lbs)
Flex: 0.0788" [2.0 mm] min. mounted on 0.063" [1.6 mm]
thick PC board
FEATURES
• High reliability
• Surface mountable
• Reflow or wave solderable
• Tape and reel packaging per EIA specifications:
4000 pieces on 7" reel
• Compliant to RoHS Directive 2002/95/EC
• Halogen-free according to IEC 61249-2-21
definition
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: - 55 °C to + 125 °C
Thermal Shock: 100 cycles, - 40 °C to + 85 °C
Humidity: + 40 °C, 85 % RH, 1000 h at full rated current
Load Life: 85 °C for 1000 h at full rated current
STANDARD ELECTRICAL SPECIFICATIONS
PART NUMBER
IND.
(nH) TOL.
TEST
FREQUENCY
(MHz)
Q
MIN.
Q TYPICAL SRF (MHz)
DCR MAX.
()
RATED DC
CURRENT
MAX. (mA)100 MHz 500 MHz 1000 MHz MIN. TYP.
ILC0603ER1N0S 1.0 0.3 nH 100 8 15 43 63 10 000 15 000 0.05 300
ILC0603ER1N2S 1.2 0.3 nH 100 8 14 38 55 10 000 14 000 0.05 300
ILC0603ER1N5S 1.5 0.3 nH 100 8 11 28 40 6000 13 000 0.10 300
ILC0603ER1N8S 1.8 0.3 nH 100 8 10 24 35 6000 11 000 0.10 300
ILC0603ER2N2S 2.2 0.3 nH 100 8 14 35 40 6000 10 000 0.10 300
ILC0603ER2N7S 2.7 0.3 nH 100 10 12 29 45 6000 7000 0.10 300
ILC0603ER3N3S 3.3 0.3 nH 100 10 16 40 47 4000 5900 0.12 300
ILC0603ER3N9S 3.9 0.3 nH 100 10 11 25 35 3500 4500 0.14 300
ILC0603ER4N7S 4.7 0.3 nH 100 10 11 26 35 3500 4500 0.16 300
ILC0603ER5N6S 5.6 0.3 nH 100 10 15 36 46 3500 4000 0.18 300
ILC0603ER6N8J 6.8 5 % 100 10 15 38 47 3000 3600 0.22 300
ILC0603ER8N2J 8.2 5 % 100 10 13 31 41 3000 3500 0.24 300
ILC0603ER10NJ 10 5 % 100 12 15 34 47 2800 3000 0.26 300
ILC0603ER12NJ 12 5 % 100 12 12 27 49 2000 2500 0.28 300
ILC0603ER15NJ 15 5 % 100 12 15 30 36 2000 2200 0.32 300
ILC0603ER18NJ 18 5 % 100 12 15 28 31 1800 2000 0.35 300
ILC0603ER22NJ 22 5 % 100 12 17 34 36 1800 1900 0.40 300
ILC0603ER27NJ 27 5 % 100 12 15 31 30 1500 1700 0.45 300
ILC0603ER33NJ 33 5 % 100 12 15 28 24 1200 1500 0.55 300
ILC0603ER39NJ 39 5 % 100 12 14 31 28 1100 1300 0.60 300
ILC0603ER47NJ 47 5 % 100 12 17 31 28 900 1300 0.70 300
ILC0603ER56NJ 56 5 % 100 12 19 34 26 900 1200 0.75 300
ILC0603ER68NJ 68 5 % 100 12 17 30 20 700 1000 0.85 300
ILC0603ER82NJ 82 5 % 100 12 16 29 18 600 1000 0.95 300
ILC0603ERR10J 100 5 % 100 12 16 24 3 600 800 1.00 300
ILC0603ERR12J 120 5 % 50 8 17 21 - 500 800 1.20 300
ILC0603ERR15J 150 5 % 50 8 19 20 - 500 700 1.20 300
ILC0603ERR18J 180 5 % 50 8 18 13 - 400 600 1.30 300
ILC0603ERR22J 220 5 % 50 8 18 - - 400 500 1.50 300
ILC0603ERR27J 270 5 % 50 8 19 - - 350 490 1.60 300
DIMENSIONS in inches [millimeters]
DESCRIPTION
ILC-0603 10 nH ± 10 % ER e3
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER
ILC 0603 ER 10N K
PRODUCT FAMILY SIZE PACKAGE
CODE
INDUCTANCE
VALUE
TOL.
0.012 ± 0.008
[0.3 ± 0.2]
Ceramic
Body
0.031 ± 0.006
[0.8 ± 0.15]
0.063 ± 0.006
[1.6 ± 0.15]
0.031 ± 0.006
[0.8 ± 0.15]
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 02-Oct-12
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
P1-P2

ILC0603ER6N8K

Mfr. #:
Buy ILC0603ER6N8K
Manufacturer:
Vishay / Dale
Description:
Fixed Inductors 6.8nH 10%
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet