JTAGjet
C2000
™
Emulator for the C2000 Family
of MCU/DSPs from Texas Instruments
JTAGjet-C2000 is a small, palm-sized In-Circuit
Debugger for the TMS320C2000 family of MCU/DSPs from
Texas Instruments. It is equipped with USB 2.0 interface that
runs in the High-Speed mode at 480 Mb/sec.
Support for the entire C2000 Family
JTAGjet-C2000 supports the following C2000 MCU/DSP
devices
:
TMS320C24x TMS320R28xx
TMS320F24x TMS320F28xx
TMS320LC240x TMS320F2801x, 28044
TMS320LF240x TMS320F2802x Piccolo™
TMS320F2823x TMS320F2803x Piccolo™
TMS320F2833x TMS320F2833x Delfino™
TMS320C28xx TMS320C2834x Delfino™
Compatible with Code Composer Studio
JTAGjet-C2000 is fully compatible with Code Composer Studio
3.1 or newer. It installs directly into the Code Composer Studio
directories and becomes visible as JTAGjet Emulator in the
CCS Setup utility and preconfigured with many C2000 targets.
Setting up to work with JTAGjet is just as easy as setting up a
TI emulator – just drag and drop the preconfigured target and
emulator configuration and start Code Composer Studio.
JTAG Chain Device Detection
For custom made boards with more than one device on the
JTAG chain, JTAGjet can detect all devices on the chain which
is necessary in order to properly configure the CCS debugger.
Variable JTAG Clock
JTAGjet-C2000 supports variable JTAG clock. It defaults to 10
MHz, but may be set from 1 kHz (for slow FPGA prototypes or
power saving devices) to 30 MHz to provide faster application
downloads and quicker Flash programming
.
Auto-sensing JTAG voltage
JTAGjet-C2000 comes with a detachable, active JTAG probe to
better accommodate long scan chains and various JTAG pinout
standards and low voltages. The standard probe comes with
14-pin XDS510 & XDS560 compatible JTAG header and
supports targets from 3V to 5V. A low voltage probe is available
as option for targets with 1.8V as well as fully electrically
isolated JTAG adapter for noisy targets (ADA-ISO-TI14).
Features
Supports all Texas Instruments C2000 MCU/DSPs
USB 2.0 high-speed port (480 Mbps) provides faster downloads
Programmable JTAG clock from 1KHz to 30 MHz
Powered by the USB port – no external power adapters needed
3 LEDs provide status of target power, JTAG and host activity
Supports Code Composer Studio 3.3 and 4.x
Optional Flash Programmer utility (does not need CCStudio)
Change JTAG clock even when the CCStudio is running
Detects and graphically shows all devices on the JTAG chain
Graphically monitors all pins on the JTAG header
Windows 7, XP and Vista compatible
What’s Included
JTAGjet emulator with USB 2.0 cable
JTAG cable with standard 14-pin JTAG probe or fully electrically
isolated probe (-ISO models)
CD-ROM with CCStudio drivers & documentation
Flasher-C2000 programming utility (C2000F models only)
Ordering Information
Part Number Description Price
JTAGjet-C2000 Emulator with CCS drivers $595
JTAGjet-C2000F Emulator with CCS drivers and Flasher $795
JTAGjet-C2000-ISO Emulator with CCS drivers and isolator $795
JTAGjet-C2000F-ISO Emulator with CCS drivers, Flasher-
C2000 and isolation adapter
$995
TMDSCCS-MCUN01 Code Composer Studio for C2000 $495
ADA-ISO-TI14E JTAG isolation adapter $250
On-line store at www.signum.com/C2000.htm
SIGNUM SYSTEMS
®
CORP.
1211 Flynn Rd., #104, Camarillo, CA 93012
Phone: (805) 383-3682
Web: www.signum.com
Distributed by: