•Multi-room streaming/local audio player
•Interactive art projects with audio requirement
•Arcade table projects with high quality, immersive audio
•Streaming (either from cloud or network storage) high-definition audio player
•Internet radio player with high-quality stereo audio
•Refit old radios and boomboxes (Roberts radios etc) with high-quality streaming audio
•And many many more….
•Full high quality audio – 192kHz / 32bit
•2 x 55 Watt peak output at 8 ohms (2 x 30 Watt RMS)
•Includes both a DAC and power amplifier – just connect to your passive speakers
•Back-powers the Raspberry Pi over the GPIO (with full HAT compliant protection) at 2.5A so
only one power supply required for the whole system.
•Plug and play compatibility for ease of use
•Hardware and software volume control from your Raspberry Pi
•Onboard, hardware jumpers for configuring mute and gain settings (jumpers could optionally be
changed with switches)
•Mute/enable with GPIO22 (this can be overridden by using jumper J4)
•No soldering required