RL73K2AR56JTD Datasheet RLP73N1ER20FTDF, RLP73N3AR082JTE, RLP73K2BR33FTDF | P1-P3

Key Features

n Up to 2 Watts at 70°C

n Values down to R10

n 8 chip sizes

n I

deal for current

detection

n Value marked on resistor

n Sizes 0201 to 2512

n 0402, 0603, 0805, 1206,

2512 stocked in

distribution

n New Higher Power Version

now available

Applications

n Audio

n Communications

n Automotive

n Low voltage power supplies

n Power management

applications

SMD Low Ohmic - Current Sense Resistors

Type RL73 Series

1773269 CIS WR 02/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help

and inches unless otherwise reference purposes only.

specified. Values in brackets Specifications subject

are standard equivalents. to change.

Characteristics - Electrical - Standard Power

TE Connectivity are pleased to offer this thick film chip resistor for current sensing positions.

It has a special metal glaze resistive element and a nickel barrier layer beneath the solder to

prolong terminal life. Following the developments by semiconductor manufacturers in the

production of a range of IC's for battery charge management and low voltage power

supplies, the RL73 Series satisfies the demand for a low ohmic shunt resistor to act as a

current sensor.

Type TCR Power rating Resistance TDF TD TE Tape

@ 70°C Range

RL73X1H 1000PPM 0.05W R10 - R13 1000 5000 -- Paper tape

RL73V1H 600PPM 0.05W R15 - R47 1000 5000 -- Paper tape

RL73N1H 300PPM 0.05W R51 - R91 1000 5000 -- Paper tape

RL73N1E 300PPM 0.0625W R10 - R91 1000 5000 -- Paper tape

RL73N1J 300PPM 0.1W R10 - R91 1000 5000 -- Paper tape

RL73H2A 100PPM 0.125W R10 - R91 1000 5000 -- Paper tape

RL73K2A 200PPM 0.125W R10 - R91 1000 5000 -- Paper tape

RL73H2B 100PPM 0.25W R10 - R91 1000 5000 -- Paper tape

RL73K2B 200PPM 0.25W R10 - R91 1000 5000 -- Paper tape

RL73H2E 100PPM 0.5W R10 - R91 1000 5000 -- Paper tape

RL73K2E 200PPM 0.5W R10 - R91 1000 5000 -- Paper tape

RL73H2H 100PPM 0.75W R10 - R91 1000 -- 4000 Embossed plastic tape

RL73K2H 200PPM 0.75W R10 - R91 1000 -- 4000 Embossed plastic tape

RL73H3A 100PPM 1W R10 - R91 1000 -- 4000 Embossed plastic tape

RL73K3A 200PPM 1W R10 - R91 1000 -- 4000 Embossed plastic tape

SMD Low Ohmic - Current Sense Resistors

Type RL73 Series

1773269 CIS WR 02/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help

and inches unless otherwise reference purposes only.

specified. Values in brackets Specifications subject

are standard equivalents. to change.

Characteristics - Electrical - High power version

ype TCR Power rating Resistance TDF TD TE Tape

70°C Range

RLP73M1E 400PPM 0.125W R051 - R10 1000 5000 -- Paper

RLP73N1E 300PPM 0.125W R110 - R47 1000 5000 -- Paper

LP73K1E 200PPM 0.125W R51 - 1R0 1000 5000 -- Paper

LP73M1J 400PPM 0.125W R051 - R10 1000 5000 -- Paper

RLP73N1J 300PPM 0.125W R110 - R47 1000 5000 -- Paper

RLP73K1J 200PPM 0.125W R51 - 1R0 1000 5000 -- Paper

LP73M2A 400PPM 0.25W R051 - R10 1000 5000 -- Paper

LP73N2A 300PPM 0.25W R110 - R47 1000 5000 -- Paper

LP73K2A 200PPM 0.25W R51 - 1R0 1000 5000 -- Paper

LP73V2B 600PPM 0.5W R010 - R020 1000 5000 -- Paper

LP73M2B 400PPM 0.5W R022 - R047 1000 5000 -- Paper

LP73N2B 300PPM 0.5W R051 - R091 1000 5000 -- Paper

RLP73K2B 200PPM 0.5W R10 - 1R0 1000 5000 -- Paper

RLP73V3A 600PPM 2W R010 - R020 1000 -- 4000 Plastic

LP73M3A 400PPM 2W R022 - R047 1000 -- 4000 Plastic

LP73N3A 300PPM 2W R051 - R091 1000 -- 4000 Plastic

RLP73K3A 200PPM 2W R10 - 1R0 1000 -- 4000 Plastic

perating Voltage=√(P*R) ; Overload Voltage=2.5*√(P*R) ; Operating Current=√(P/R)

aximum operating temperature -55°C to +155°C

* Recommended Circuit Board Design

For resistors operated in ambient temperatures above 70°C, power rating must be derated in accordance with this curve.

0 20 40 60 80 100 120 140 160 180

100

Power Ratio (%)

Ambient Temperature (°C)

Power Derating Curve

Characteristics - Environmental

Item Requirement Test Method

Temperature Coefficient

As Specification -55°C ~ +125°C, 25°C is the reference temperature

of Resistance (TCR):

Short Time Overload:

±(0.5%+0.05Ω)

RCWV*2.5 or Max. overload voltage for 5 seconds

for higher Power rating: ±(1.0% + 0.05Ω)

Insulation Resistance: ≥10G Max. overload voltage for 1 minute

±(1.0%+0.05Ω)

70 ±2°C, Max. working voltage for 1000 hrs with

Endurance:

1.5 hrs “ON” and 0.5 hrs “OFF”

Damp Heat with Load: ±(0.5%+0.05Ω)

40 ±2°C, 90-95% R.H. max. working voltage

for 1000 hrs with 1.5 hrs “ON” and 0.5 hrs “OFF”

Dry Heat: ±(0.5%+0.05Ω) at +155°C for 1000 hrs

Bending Strength:

As Spec.

Bending once for 5 seconds 2010, 2512 sizes: 2mm

Other sizes: 3mm

Solderability: 95% min. coverage 245 ±5°C for 3 seconds

Resistance to Soldering Heat: ±(0.5%+0.05Ω) 260 ±5°C for 10 seconds

Voltage Proof: No breakdown or flashover 1.42 times RCWV (RMS) for 1 minute

Leaching:

Individual leaching area ≤5%

260±5°C for 30 seconds

Total leaching area ≤10%

Thermal Shock: ±(0.5%+0.05Ω) -55°C to +155°C, 5 cycles

Reference Standards: IEC 60115-1, 60068-2-58; JIS-C 5201-1

Storage Temperature: 25±3°C; Humidity < 80%RH

SMD Low Ohmic - Current Sense Resistors

Type RL73 Series

1773269 CIS WR 02/2012 Dimensions are in millimeters Dimensions are shown for For email, phone or live chat, go to: te.com/help

and inches unless otherwise reference purposes only.

specified. Values in brackets Specifications subject

are standard equivalents. to change.

Dimensions

Part Number LWCD t

RL73 1H (0201) 0.58 ±0.05 0.29 ±0.05 0.15 ±0.05 0.12 ±0.05 0.23 ±0.05

RL(P)73 1E (0402) 1.00 ±0.05 0.50 ±0.05 0.20 ±0.10 0.25 ±0.10 0.32 ±0.10

L(P)73 1J (0603) 1.60 ±0.10 0.80 ±0.10 0.30 ±0.20 0.30 ±0.20 0.45 ±0.10

RL(P)73 2A (0805) 2.00 ±0.15 1.25 ±0.15 0.40 ±0.25 0.30 ±0.20 0.55 ±0.10

RL(P)73 2B (1206) 3.10 ±0.10 1.55 ±0.15 0.40 ±0.25 0.50 ±0.30 0.55 ±0.10

RL(P)73 2E (1210) 3.10 ±0.10 2.50 ±0.15 0.50 ±0.25 0.50 ±0.30 0.55 ±0.10

RL(P)73 2H (2010) 5.00 ±0.20 2.50 ±0.15 0.50 ±0.25 0.60 ±0.30 0.60 ±0.15

L73 3A (2512) 6.35 ±0.20 3.10 ±0.15 0.55 ±0.25 0.60 ±0.30 0.60 ±0.10

RLP73 3A (2512) <R10 6.35 ±0.20 3.15 ±0.15 0.55 ±0.25 0.60 ±0.30 0.74 ±0.10

RLP73 3A (2512) ≥R10 6.35 ±0.20 3.15 ±0.15 2.10 ±0.10 0.60 ±0.30 0.74 ±0.10

. Alumina Substrate

. Bottom Electrode (Ag)

3. Top Electrode (Ag-Pd)

. Edge Electrode (NiCr)

. Barrier Layer (Ni)

6. External Electrode (Sn)

. Resistor Layer (NiCr)

. Overcoat (Epoxy)

9. Marking

Recommend Land Pattern

Type AB C

RL73 1H (0201) 0.25 0.3 0.40 ±0.2

RL(P)73 1E (0402) 0.5 0.5 0.60 ±0.2

RL(P)73 1J (0603) 0.8 1.0 0.90 ±0.2

RL(P)73 2A (0805) 1.0 1.0 1.35 ±0.2

RL(P)73 2B (1206) 2.0 1.15 1.70 ±0.2

RL(P)73 2E (1210) 2.0 1.15 2.50 ±0.2

RL(P)73 2H (2010) 3.6 1.4 2.50 ±0.2

RL73 3A (2512) 4.9 1.6 3.10 ±0.2

RLP73 3A (2512) <R10 4.9 1.6 3.10 ±0.2

RLP73 3A (2512) ≥R10 1.0 3.55 3.10 ±0.2

P1-P3 P4-P5

RL73K2AR56JTD

Mfr. #:

Buy RL73K2AR56JTD

Manufacturer:

Description:

Current Sense Resistors - SMD RL73K 2A R56 5% 5K RL

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

RL73K2AR56JTD

RL73K2AR56JTD

Products related to this Datasheet