Evaluation Board User Guide
UG-140
One Technology Way • P. O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Te l: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Universal Evaluation Board for Triple, High Speed Op Amps with Charge Pump
Offered in 16-Lead, 4 mm × 4 mm LFCSP Packages
PLEASE SEE THE LAST PAGE FOR AN IMPORTANT
WARNING AND LEGAL TERMS AND CONDITIONS.
Rev. 0 | Page 1 of 8
FEATURES
Enables quick breadboarding/prototyping
User-defined circuit configuration
Edge-mounted SMA connector provisions
Easy connection to test equipment and other circuits
GENERAL DESCRIPTION
The EB-O16CP44CP-3Z universal evaluation board is designed
to help users evaluate the triple, high speed op amps with charge
pump offered in 16-lead LFCSP packages. The EB-O16CP44CP-3Z
is a bare board (that is, there are no components soldered to the
board) that enables users to quickly prototype a variety of triple
op amp circuits, which minimizes risk and reduces time to market.
Figure 1 shows the component side of the bare evaluation board,
and Figure 2 shows the circuit side of the bare evaluation board.
The evaluation board is a 2-layer printed circuit board (PCB)
that accepts SMA edge-mounted connectors on the inputs and
outputs for efficient connection to test equipment or other circuitry.
The ground plane, component placement, and supply bypassing
are designed to minimize parasitic inductances and capacitances.
Figure 3 shows the evaluation board schematic. The PCB layout
pattern for the component side is shown in Figure 4, and the PCB
layout pattern for the circuit side is shown in Figure 6. The board
assembly drawing for the component side is shown in Figure 5,
and the board assembly drawing for the circuit side is shown in
Figure 7.
The C6 to C9, C11 to C14, C17 to C19, and C22 capacitors are
not needed for normal operation.
EVALUATION BOARD COMPONENT AND CIRCUIT SIDE DIAGRAMS
09028-001
Figure 1. EB-O16CP44CP-3Z Evaluation Board, Component Side
09028-002
Figure 2. EB-O16CP44CP-3Z Evaluation Board, Circuit Side
