OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MPVZ5010GW6U

P1-P3P4-P6P7-P9P10-P12P13-P14
MPVZ5010G
Rev 0, 09/2005
Freescale Semiconductor
Technical Data
© Freescale Semiconductor, Inc., 2005. All rights reserved.
Integrated Silicon Pressure Sensor
On-Chip Signal Conditioned,
Temperature Compensated and
Calibrated
The MPVZ5010G series piezoresistive transducers are state-of-the-art
monolithic silicon pressure sensors designed for the appliance, consumer,
healthcare, industrial and automotive market. The analog output can be read
directly into the A/D input of Freescale microcontrollers. This transducer
combines advanced micromachining techniques, thin-film metallization, and
bipolar processing to provide an accurate, high level analog output signal that is
proportional to the applied pressure. The axial port has been modified to
accommodate industrial grade tubing.
Features
• 5.0% Maximum Error over 0° to 85°C
• Temperature Compensated over -40° to +125°C
• Durable Thermoplastic (PPS) Package
• Available in Surface Mount (SMT) or Through-hole (DIP) Configurations
Application Examples
• Washing Machine Water Level Measurement (Reference AN1950)
• Ideally Suited for Microprocessor or Microcontroller-Based Systems
• Appliance Liquid Level and Pressure Measurement
• Respiratory Equipment
ORDERING INFORMATION
Device
Type
Case
No.
MPVZ Series
Order No.
Packing
Options
Device
Marking
Surface Mount 1735-01 MPVZ5010GW6U Rails MZ5010GW
Through-Hole 1560-02 MPVZ5010GW7U Rails MZ5010GW
Surface Mount 482-01 MPVZ5010G6U Rails MZ5010G
Surface Mount 482-01 MPVZ5010G6T1 Tape & Reel MZ5010G
Through-Hole 482B-03 MPVZ5010G7U Rails MZ5010G
MPVZ5010G
SERIES
PIN NUMBERS
(1)
1. Pins 1, 5, 6, 7, and 8 are internal device
connections. Do not connect to external
circuitry or ground. Pin 1 is noted by the
notch in the lead.
1 N/C 5 N/C
2 V
S
6 N/C
3 GND 7 N/C
4 V
OUT
8 N/C
INTEGRATED
PRESSURE SENSOR
0 to 10 kPA (0 to 1019.78 mm H
2
O)
0.2 to 4.7 V OUTPUT
SMALL OUTLINE PACKAGE
SURFACE MOUNT
SMALL OUTLINE PACKAGE
THROUGH-HOLE
J
MPVZ5010GW6U
CASE 1735-01
MPVZ5010G6U/T1
CASE 482-01
MPVZ5010G7U
CASE 482B-03
MPVZ5010GW7U
CASE 1560-02
MPVZ5010G
Sensors
2 Freescale Semiconductor
Figure 1. Fully Integrated Pressure Sensor Schematic
Table 1. Maximum Ratings
(1)
1. Exposure beyond the specified limits may cause permanent damage or degradation to the device.
Rating Symbol Value Unit
Maximum Pressure (P1 > P2) P
max
40 kPa
Storage Temperature T
stg
–40 to +125 °C
Operating Temperature T
A
–40 to +125 °C
Sensing
Element
Thin Film
Temperature
Compensation
and
Gain Stage #1
Gain Stage #2
and
Ground
Reference
Shift Circuitry
V
S
V
out
GND
Pins 1 and 5 through 8 are NO CONNECTS
for surface mount package
Pins 4, 5, and 6 are NO CONNECTS for
unibody package
MPVZ5010G
Sensors
Freescale Semiconductor 3
Table 2. Operating Characteristics
(V
S
= 5.0 Vdc, T
A
= 25°C unless otherwise noted, P1 > P2. Decoupling circuit shown in
Figure 3 required to meet specification.)
Characteristic Symbol Min Typ Max Unit
Pressure Range
(1)
1. 1.0 kPa (kiloPascal) equals 0.145 psi.
P
OP
0—10
1019.78
kPa
mm H
2
O
Supply Voltage
(2)
2. Device is ratiometric within this specified excitation range.
V
S
4.75 5.0 5.25 Vdc
Supply Current I
o
— 5.0 10 mAdc
Minimum Pressure Offset
(3)
(0 to 85°C)
@ V
S
= 5.0 Volts
3. Offset (V
off
) is defined as the output voltage at the minimum rated pressure.
V
off
0 0.2 0.425 Vdc
Full Scale Output
(4)
(0 to 85°C)
@ V
S
= 5.0 Volts
4. Full Scale Output (V
FSO
) is defined as the output voltage at the maximum or full rated pressure.
V
FSO
4.475 4.7 4.925 Vdc
Full Scale Span
(5)
(0 to 85°C)
@ V
S
= 5.0 Volts
5. Full Scale Span (V
FSS
) is defined as the algebraic difference between the output voltage at full rated pressure and the output voltage at the
minimum rated pressure.
V
FSS
4.275 4.5 4.725 Vdc
Accuracy
(6)
(0 to 85°C)
6. Accuracy (error budget) consists of the following:
• Linearity: Output deviation from a straight line relationship with pressure over the specified pressure range.
• Temperature Hysteresis: Output deviation at any temperature within the operating temperature range, after the temperature is cycled to
and from the minimum or maximum operating temperature points, with zero differential pressure applied.
• Pressure Hysteresis: Output deviation at any pressure within the specified range, when this pressure is cycled to and from the
minimum or maximum rated pressure, at 25°C.
• TcSpan: Output deviation over the temperature range of 0° to 85°C, relative to 25°C.
• TcOffset: Output deviation with minimum rated pressure applied, over the temperature range of 0° to 85°C, relative to 25°C.
• Variation from Nominal: The variation from nominal values, for Offset or Full Scale Span, as a percent of V
FSS
, at 25°C.
———±5.0 %V
FSS
Sensitivity V/P — 450
4.413
—- mV/kPa
mV/mm H
2
O
Response Time
(7)
7. Response Time is defined as the time for the incremental change in the output to go from 10% to 90% of its final value when subjected to a
specified step change in pressure.
t
R
—1.0—- ms
Output Source Current at Full Scale Output I
O+
—0.1—-mAdc
Warm-Up Time
(8)
8. Warm-up Time is defined as the time required for the product to meet the specified output voltage after the Pressure has been stabilized.
——20—- ms
Offset Stability
(9)
9. Offset Stability is the product's output deviation when subjected to 1000 hours of Pulsed Pressure, Temperature Cycling with Bias Test.
——±0.5 —- %V
FSS
P1-P3P4-P6P7-P9P10-P12P13-P14

MPVZ5010GW6U

Mfr. #:
Buy MPVZ5010GW6U
Manufacturer:
NXP / Freescale
Description:
Board Mount Pressure Sensors SOP GWING SIFEL W/M PORT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet