Reference Spec.No.JENF243A-9103G-01 P3/8
MURATA MFG.CO.,LTD.
Reference Only
AEC-Q200
Murata Specification / Deviation
No.
Stress Test Method
8 Operational Life Apply 125 deg C 1000hours
Set for 24hours at
room temperature,
then measured
Meet Table A after testing.
If the rated current of parts exceed 1A,
the operating temperature should be 85 deg C.
9
External Visual Visual inspection No abnormalities
10 Physical Dimension Meet ITEM 4
(Style and Dimensions)
No defects
12 Resistance
to Solvents
Per MIL-STD-202 Method 215 Not Applicable
13 Mechanical Shock
Per MIL-STD-202 Method 213
Condition F:
1500g's(14.7N)/0.5ms/Half sine
Meet Table A after testing.
14 Vibration 5g's(0.049N) for 20 minutes
12cycles each of 3 oritentations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150C +/-10 deg C, 60s to 90s
Meet Table A after testing.
17 ESD
Per AEC-Q200-002 ESD Rank: Meet Item 3 (Rating)
BLM15AG sereis: Meet Table A after testing.
BLM15BB/BD series: Meet Table B after testing.
Table B
18 Solderability
Per J-STD-002
Method b : Not Applicable
95% of the terminations is to be soldered.
19 Electrical
Characterization
Measured : Impedance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Meet Table A after testing.
22 Terminal Strength
Per AEC-Q200-006
Murata deviation request: 5N
No defects
30 Electrical
Transient
Conduction
Per ISO-7637-2 Not Applicable
Appearance No damage
Impedance
Change
(at 100MHz)
Within ±40%
DC
Resistance
Meet item 3.