SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
Note.4
HOLD UP TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
EFFICIENCY (Typ.)
INPUT
INRUSH CURRENT (Typ.)
WITHSTAND VOLTAGE
ISOLATION RESISTANCE
WORKING HUMIDITY
WORKING TEMP.
STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
MTBF
DIMENSIONOTHERS
NOTE
PACKING
OVERLOAD
OVER VOLTAGE
AC CURRENT (Typ.)
600ms, 30ms at full load
80ms/230VAC 15ms/115VAC at full load
85 ~ 264VAC 120 ~ 370VDC
47 ~ 440Hz
71%68% 75%
13.8 ~ 16.2V
75%
17.25 ~ 20.25V
77%
27.6 ~ 32.4V
0.12A/115VAC 0.08A/230VAC
COLD START 20A/115VAC 40A/230VAC
115% ~ 260% rated output power
5.75 ~ 6.75V3.8 ~ 4.95V
Protection type : Hiccup mode, recovers automatically after fault condition is removed
I/P-O/P:3KVAC
I/P-O/P:100M Ohms / 500VDC / 25 / 70% RH℃
20 ~ 90% RH non-condensing
-30 ~ +70 (Refer to "Derating Curve")℃
-40 ~ +85 , 10 ~ 95% RH℃
10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes
1495.8Khrs min. MIL-HDBK-217F (25 )℃
45.7*25.4*21.5 mm (L*W*H)
0.033Kg;270pcs/ 9.8Kg/0.97CUFT
File Name:IRM-05-SPEC 2018-01-12
±0.3%
±0.5%
±0.3%
±0.5%
±0.3%
±0.5%
±0.3%
±0.5%
±0.3%
±0.5%
±2.5% ±2.5% ±2.5% ±2.5%±2.5%
200mVp-p
200mVp-p
200mVp-p 200mVp-p 200mVp-p
5V3.3V 12V 15V 24V
1A1.25A 0.42A 0.33A 0.23A
0 ~ 1A0 ~ 1.25A 0 ~ 0.42A 0 ~ 0.33A 0 ~ 0.23A
5W4.125W 5.04W 4.95W 5.52W
IRM-05-5 IRM-05-12 IRM-05-15 IRM-05-24IRM-05-3.3
SAFETY STANDARDS
UL60950-1, TUV EN60950-1, approvedEAC TP TC 004
5W Single Output Encapsulated Type
IRM-05 series
■ Features :
RIPPLE & NOISE (max.) Note.2
VOLTAGE TOLERANCE Note.3
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.℃
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
6. The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher ℃℃
than 2000m(6500ft).
ENVIRONMENT
SAFETY &
EMC
(Note 4)
PROTECTION
Protection type : Shut off o/p voltage, clamping by zener diode
Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3, EAC TP TC 020
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, heavy industry level (surge L-N:1KV), criteria A, EAC TP TC 020
Universal AC input / Full range
Compact size
Protections: Short circuit / Overload / Over voltage
Cooling by free air convection
Isolation classⅡ
No load power consumption<0.1W
100% full load burn-in test
High reliability
3 years warranty
EMC IMMUNITY
EMC EMISSION
LEAKAGE CURRENT
< 0.25mA/240VAC
Bauar
Sicherheit
egel gema
t gepruft
od
be
www.
ID 2000000000
tuv.com
wac g
os
±℃ ℃)0.03%/ (0 ~ 50
LPS
