OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC365G8

P1-P3P4-P6P7-P7
FREQUENCY DIVIDERS & DETECTORS - SMT
4
4 - 3
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Output Voltage Waveform,
Pin= 0 dBm, Fout= 882 MHz, T= 25 °C
Absolute Maximum Ratings
Outline Drawing
Note: Divider will operate over full voltage range shown above
Typical Supply Current vs. Vcc
NOTES:
1. PACKAGE MATERIAL: ALUMINA LOADED BOROSILICATE GLASS.
2. LEAD, BASE, COVER MATERIAL: KOVAR™ (#7052 CORNING).
3. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER
ELECTROLYTIC NICKEL 50 MICROINCHES MIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES: ±.005 [0.13] UNLESS OTHERWISE SPECIFIED.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND.
Vcc (V) Icc (mA)
4.75 110
5.0 120
5.25 130
RF Input (Vcc = +5V) +13 dBm
Vcc +5.5V
Junction Temperature (T
j
)135 °C
Continuous Pdiss (T = 85 °C)
(derate 12.5 mW/° C above 85 °C)
625 mW
Thermal Resistance (R
TH
)
(junction to ground paddle)
80 °C/W
Storage Temperature -65 to -150 °C
Operating Temperature -40 to +85 °C
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
-700
-500
-300
-100
100
300
500
700
22.7 23.1 23.5 23.9 24.3 24.7
AMPLITUDE (mV)
TIME
(
nS
)
HMC365G8
v02.0410
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
4
4 - 4
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Pin Description
Pin Number Function Description Interface Schematic
1 IN RF Input must be DC blocked.
2, 6 N/C No connection.
3IN
RF Input 180° out of phase with pin 1 for differential operation.
AC ground for single ended operation.
4GND
Ground: Backside of package has exposed metal ground which
must be connected to a RF/DC ground.
5 OUT Divided output 180° out of phase with pin 7.
7 OUT Divided Output.
8 VCC Supply voltage 5V ± 0.25V.
HMC365G8
v02.0410
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
FREQUENCY DIVIDERS & DETECTORS - SMT
4
4 - 5
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Evaluation PCB
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and backside ground slug should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available
from Hittite upon request. This evaluation board is
designed for single ended input testing. J2 and J3
provide differential output signals.
Item Description
J1 - J3 PCB Mount SMA RF Connector
C1 - C4 100 pF Capacitor, 0402 Pkg,
C5 1000 pF Capacitor, 0603 Pkg.
C6 10 μF Tantalum Capacitor
U1 HMC365G8 Divide-by-4
PCB
[2]
106580 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
List of Materials for Evaluation PCB 106582
[1]
HMC365G8
v02.0410
SMT GaAs HBT MMIC
DIVIDE-BY-4, DC - 13 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P7

HMC365G8

Mfr. #:
Buy HMC365G8
Manufacturer:
Analog Devices / Hittite
Description:
Prescaler InGaP HBT Divide-by-4 SMT, DC - 13 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet