MEMSIC MMC3416PJ-B Prototyping Board User's Guide Page 1of 1 Rev A
MMC3416PJ-B Prototyping Board
MMC3416PJ-B
GENERAL DESCRIPTION
The MMC3416PJ-B provides a convenient and easy way to
evaluate and prototype with the MMC3416PJ three axes
magnetic sensor. The magnetic sensor and passive
components needed for operations are SMT mounted on the
board. Communication, power and ground pins of the
MMC3416PJ SMT device are brought out to standard 0.10
inch on center connections on the sides of the prototyping
board. Wires can either be soldered directly to the
prototyping board or DIP pins can be used with widely
available breadboard kits.
For complete performance specifications of the
MMC3416PJ refer to the MMC3416PJ datasheet.
PIN DESCRIPTION
Pin Name Description
P1-1 VDD I2C Supply Voltage
P1-2 VDA Power
P1-3 GND Ground
P2-1 SDA I2C SDA
P2-2 SCL I2C SCL
P2-3 NC No Connect
SCHEMATIC OF THE MMC3416PJ-B
MMC3416PJ-B
MMC3416PJ-B
PCB OUTLINE AND CONNECTION DIMENSIONS
MMC3416PJ-B
Information furnished by MEMSIC is believed to be accurate and reliable.
However, no responsibility is assumed by MEMSIC for its use, nor for any
infringements of patents or other rights of third parties, which may result from
its use. No license is granted by implication or otherwise under any patent or
patent rights of MEMSIC.
MEMSIC, Inc.
One Technology Drive, Suite 325, Andover, MA, 01810, USA
Tel: +1 978 738 0900 Fax: +1 978 738 0196
www.memsic.com
