Absolute maximum ratings and operating conditions MC33078
2/15 Doc ID 2177 Rev 6
1 Absolute maximum ratings and operating conditions
Table 1. Absolute maximum ratings (AMR)
Symbol Parameter Value Unit
V
CC
Supply voltage ±18 or +36 V
V
id
Differential input voltage
(1)
1. Either or both input voltages must not exceed the magnitude of V
CC
+
or V
CC
-
.
±30 V
V
i
Input voltage
(1)
±15 V
Output short-circuit duration Infinite s
T
j
Junction temperature +150 °C
T
stg
Storage temperature -65 to +150 °C
R
thja
Thermal resistance junction-to-ambient
(2)
,
(3)
SO-8
DIP8
2. Short-circuits can cause excessive heating and destructive dissipation.
3. R
th
are typical values.
125
85
°C/W
R
thjc
Thermal resistance junction-to-case
(2)
,
(3)
SO-8
DIP8
40
41
°C/W
ESD
HBM: human body model
(4)
4. Human body model: A 100 pF capacitor is charged to the specified voltage, then discharged through
a 1.5 kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
2kV
MM: machine model
(5)
5. Machine model: A 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
200 V
CDM: charged device model
(6)
6. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to ground through only one pin. This is done for all pins.
1.5 kV
Table 2. Operating conditions
Symbol Parameter Value Unit
V
CC
Supply voltage ±2.5 to ±15 V
T
oper
Operating free air temperature range -40 to 125 °C