Type 4, 4X Polyester Pushbutton Enclosure
PJPBLC
Series
Application
Designed for use as instrument enclosures, electric, hydraulic or
pneumatic control housings, electrical junction boxes or terminal wiring
enclosures.
Provides outstanding insulation and protection where equipment may be
hosed down or be very wet.
Ideal in applications with high temperatures or highly corrosive
environments.
Standards
UL 508 Type 1, 2, 3, 4, 4X, 12 and 13
CSA Type 1, 2, 3, 4, 4X, 12 and 13
Complies with
NEMA Type 1, 2, 3, 4, 4X, 12 and 13
IEC 60529, IP66
Construction
Molded fiberglass polyester enclosure with matching cover is easily
punched, cut, or drilled.
Standard JIC sizes under 18" x 16".
Threaded brass inserts are provided for optional inner panel or terminal kit
mounting.
Cover is fastened with captive stainless steel screws in threaded brass
inserts.
Captive oil resistant gasket provides a positive seal.
Threaded brass inserts are provided for mounting feet to the rear of the
enclosure.
Stainless steel mounting brackets and hardware are provided for mounting
to the rear of the enclosure.
Enhanced UV inhibitors protect against outdoor weathering.
Operating temperatures between 130°C and -40°C (266°F to -40°F).
Impact index of 6.78J (5 ft/lb).
For corrosion resistance information, please refer to table in Technical
Information.
Finish
Fiberglass polyester material has a gray finish.
Optional inner panels are available in white powder coated finished steel or
unfinished aluminum.
Accessories
Quality Products. Service Excellence.