HMC575LP4E Datasheet HMC575LP4E, HMC575LP4, HMC575LP4ETR | P4-P6

FREQ. MULTIPLIERS - ACTIVE - SMT

7 - 96

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Input Return Loss vs. Temperature Output Return Loss vs. Temperature

-20

-18

-16

-14

-12

-10

-8

-6

-4

-2

6 6.5 7 7.5 8 8.5 9

+25C

+85C

-40C

OUTPUT RETURN LOSS (dB)

FREQUENCY (GHz)

-25

-20

-15

-10

-5

3 3.25 3.5 3.75 4 4.25 4.5

+25C

+85C

-40C

INPUT RETURN LOSS (dB)

FREQUENCY (GHz)

HMC575LP4 / 575LP4E

v00.0506

SMT GaAs MMIC x2 ACTIVE FREQUENCY

MULTIPLIER, 6 - 9 GHz OUTPUT

Absolute Maximum Ratings

RF Input (Vdd = +5V) +13 dBm

Supply Voltage (Vdd) +6.0 Vdc

Channel Temperature 150 °C

Continuous Pdiss (T= 85 °C)

(derate 7.9 mW/°C above 85 °C)

512 mW

Thermal Resistance

(channel to ground paddle)

127 °C/W

Storage Temperature -65 to +150 °C

Operating Temperature -40 to +85 °C

Typical Supply Current vs. Vdd

Vdd (Vdc) Idd (mA)

4.5 89

5.0 90

5.5 91

Note:

Multiplier will operate over full voltage range shown above.

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

FREQ. MULTIPLIERS - ACTIVE - SMT

7 - 97

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Outline Drawing

HMC575LP4 / 575LP4E

v00.0506

SMT GaAs MMIC x2 ACTIVE FREQUENCY

MULTIPLIER, 6 - 9 GHz OUTPUT

NOTES:

1. LEADFRAME MATERIAL: COPPER ALLOY

2. DIMENSIONS ARE IN INCHES [MILLIMETERS]

3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.

PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.

6. ALL GROUND LEADS AND GROUND PADDLE MUST BE

SOLDERED TO PCB RF GROUND.

7. REFER TO HITTITE APPLICATION NOT FOR SUGGESTED

LAND PATTERN.

Part Number Package Body Material Lead Finish MSL Rating Package Marking

[3]

HMC575LP4 Low Stress Injection Molded Plastic Sn/Pb Solder

MSL1

[1]

H575

XXXX

HMC575LP4E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn

MSL1

[2]

H575

XXXX

[1] Max peak re ow temperature of 235 °C

[2] Max peak re ow temperature of 260 °C

[3] 4-Digit lot number XXXX

Package Information

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

FREQ. MULTIPLIERS - ACTIVE - SMT

7 - 98

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Pin Number Function Description Interface Schematic

1, 5 - 14, 18,

19, 21, 23, 24

N/C

These pins are internally not connected; however,

this product was speci ed with these pins connected

to RF/ DC ground.

2, 4, 15, 17 GND

Package bottom must also be connected

to RF/DC ground.

3RFIN

Pin is AC coupled and matched

to 50 Ohms from 3 - 4.5 GHz.

16 RFOUT

Pin is AC coupled and matched

to 50 Ohms from 6 - 9 GHz.

20, 22 Vdd2, Vdd1

Supply voltage 5V ± 0.5V. External bypass capacitors

of 100 pF and 2.2 μF are required.

Pin Description

Application Circuit

Component Value

C1, C2 100 pF

C3, C4 2.2 μF

HMC575LP4 / 575LP4E

v00.0506

SMT GaAs MMIC x2 ACTIVE FREQUENCY

MULTIPLIER, 6 - 9 GHz OUTPUT

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

For price, delivery, and to place orders: Analog Devices, Inc.,

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106

Phone: 781-329-4700 • Order online at www.analog.com

Application Support: Phone: 1-800-ANALOG-D

P1-P3 P4-P6 P7-P7

HMC575LP4E

Mfr. #:

Buy HMC575LP4E

Manufacturer:

Analog Devices / Hittite

Description:

RF Amplifier x2 Active mult SMT, 6 - 9 GHz Fout

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HMC575LP4E

HMC575LP4E

Products related to this Datasheet