OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

GP1S173LCS2F

P1-P3P4-P6P7-P9P10-P10
GP1S173LCS2F
7
Sheet No.: OP13014EN
■Recommended Installation Hole drawing Scale : 2/1 Unit : 1/1mm
(Drawing No. CY14033i06)
*1 We recommend to fix GP1S173LCS2F at punching side on the fixing plate (metal plate).
*2 Please decide the final dimensions at your side after confirmation by the actual
applications, Because mounting efficiency and mounted stabilization are dependent
on mounting plate corner-R and punched state.
*3 Tolerance shall be ±0.1mm
*4 Please don’t hold connector area but sensor area when fitting in or putting out on the metal plate.
Normal mounting type
Thickness of plate for 1.6mm Thickness of plate for 1.2mm Thickness of plate for 1.0mm
Irregular mounting protection type
Thickness of plate for 1.6mm Thickness of plate for 1.2mm Thickness of plate for 1.0mm
GP1S173LCS2F
8
Sheet No.: OP13014EN
■Parts
This product uses the following parts.
● Light detector (Quantity : 1)
Type
Material
Maximum sensitivity
wavelength (nm)
Sensitivity
wavelength (nm)
Response time
(μs)
Phototran-
sistor
Silicon
(Si)
930
400 to 1200
3
● Light emitter (Quantity : 1)
Type
Material
Maximum light emitting
wavelength (nm)
I/O Frequency
(MHz)
Infrared light
emitting diode
(non-coherent)
GaAs
940
0.3
● Material
Case
Lead flame
Black polycarbonate resin
(UL 94V-0)
Copper Alloy
(With plating)
● Others
This product shall not be radiation flux proof.
The laser oscillator is not equipped on this product.
The terminals are covered with Tin Plating (more than 99.99%).
GP1S173LCS2F
9
Sheet No.: OP13014EN
■Packing specification
● Package
No.
Name
Material
Quantity
1
Packing case
Corrugated cardboard
1/1000
2
Pad
Corrugated cardboard
6/1000
3
Tray
Polystyrene
1/200
4
Kraft tape
-
● Packing method
1) 5 products are put in 1 pocket.
The longer direction of the product is arranged in the arbitrary direction.
200 products are put in the tray. <Fig.1>
2) The pads are attached at the top and the bottom of the trays and also inserted between the trays. <Fig.2>
3) Seal packing case with Kraft tape. <Fig.3>
4) Indication phase items
The contents of the carton indication conforms to EIAJ C-3 and the following items are indicated.
Model No., Internal production control name, Quantity, Packing date, Corporate name,
Country of origin <Fig.3>
(1000pcs. / packing case)
(Approximately 2.26kg / packing mass)
P1-P3P4-P6P7-P9P10-P10

GP1S173LCS2F

Mfr. #:
Buy GP1S173LCS2F
Manufacturer:
Sharp Microelectronics
Description:
Optical Switches, Transmissive, Phototransistor Output Phototransistor .5mm Gap 5 mm Slit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet