OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

805M1-0200-01

P1-P3
SENSOR SOLUTIONS /// Model 805M1 Rev D 9/2015
Page 1
MODEL 805M1 ACCELEROMETER
SPECIFICATIONS
TO-5 Series Accelerometer
3-Wire Voltage Output
Low-Cost, Embedded Applications
<0.80mA Power Consumption
The Model 805M1 is a miniature adhesive
mount voltage output accelerometer built on a 3-pin TO-
5 header. It is available in ±20g and ±500g dynamic
ranges and offers a flat frequency response to 12kHz.
The accelerometer features a hermetic construction in a
TO-5 header configuration. The model 805M1
incorporates a stable piezo-ceramic crystal with low
power electronics in a 100% shielded housing suitable
for many embedded OEM applications.
The accelerometer is offered in two
configurations; one for adhesive mounting and one for
stud mounting.
FEATURES
±20g and ±500g Range
Wide bandwidth up to 12kHz
TO-5 Configuration
Hermetically Sealed
-40°C to +100°C Operating Range
Case Grounded Design
3.0-5.5 Excitation Voltage
APPLICATIONS
Machine Monitoring
Low-Cost OEM Installation
Permanent Structural Study
Embedded Sensing Solution
Data Loggers
DIMENSIONS
MODEL 805M1 ACCELEROMETER
SENSOR SOLUTIONS /// Model 805M1 Rev D 9/2015
Page 2
PERFORMANCE SPECIFICATIONS
All values are typical at +24°C, 80Hz and 5Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update
and change these specifications without notice.
Parameters
DYNAMIC
Notes
Range (g)
±20
±100
±200
±500
Sensitivity (mV/g)
100
20
10
4
±10%
Frequency Response (Hz)
1-8000
1-8000
1-8000
1-8000
±1dB
Frequency Response (Hz)
0.4-10000
0.4-12000
0.4-12000
0.4-12000
±3dB
Natural Frequency (Hz)
34000
34000
34000
34000
Non-Linearity (%FSO)
±1
±1
±1
±1
Transverse Sensitivity (%)
5
5
5
5
Shock Limit (g)
5000
5000
5000
5000
Residual Noise (g RMS)
0.001
0.003
0.003
0.005
Broadband 1Hz to 10kHz
ELECTRICAL
Bias Voltage (Vdc)
Exc Voltage / 2
Total Supply Current (mA)
<0.80
Excitation Voltage (Vdc)
1
3.0 to 5.5
Output Impedance (Ω)
Insulation Resistance (MΩ)
>100
@50Vdc
Full Scale Output Voltage (V)
±2
Grounding
Case grounded to mounting surface
ENVIRONMENTAL
Temperature Response (%)
±10
Operating Temperature (°C)
-40 to +100
Storage Temperature (°C)
-54 to +125
PHYSICAL
Sensing Element
Piezo-Ceramic
Case Material
Stainless Steel
Weight (grams)
5.0
Mounting
Adhesive or Circuit Board (M3 Stud Mounting for -01 Option)
1
The model 805M1 can be operated with 2.8V excitation but the full-scale range will be limited.
Calibration supplied: CS-SENS-0100 NIST Traceable Amplitude Calibration at 80Hz
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this
information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the
right to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the
suitability of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or
circuit and specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different
applications. All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not
convey any license under its patent rights nor the rights of others.
MODEL 805M1 ACCELEROMETER
SENSOR SOLUTIONS /// Model 805M1 Rev D 9/2015
Page 3
ORDERING INFORMATION
PART NUMBERING Model Number+Range
805M1-GGGG -XX
l l_____ Optional Stud Dash Number Dash Number Stud Options
l_____ Range (0020 is 20g) -01 M3 x 0.5 6g
Example: 805M1-0020
Model 805M1, 20g
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
1000 Lucas Way
Hampton, VA 23666
Sales and Customer Service
Tel: +1-800-745-8008 or
+1-757-766-1500
Fax: +1-757-766-4297
t&m@meas-spec.com
EUROPE
MEAS France SAS
a TE Connectivity Company
26 Rue des Dames
F78340 Les Clayes-sous-Bois
France
Sales and Customer Service
Tel: +33 (0) 1 79 33 00
Fax: +33(0)1 34 81 03 59
t&m@meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Sales and Customer Service
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
t&m@meas-spec.com
P1-P3

805M1-0200-01

Mfr. #:
Buy 805M1-0200-01
Manufacturer:
TE Connectivity / Measurement Specialties
Description:
Accelerometers ACCELEROMETER 200G TO5 PKG
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet