B9
2.54mm Connectors Directly Mounted on Board
HIF2E Series
■Features
1. Directly Mounted on Board
This connector can be directly mounted on the board using the
1.27mm pitch flat cable.
2. Variation in Number of Contacts
10, 14, 16, 20, 26, 30, 34, 40, 50, and 60 contacts, are available
3. Applicable Cable
The applicable cable is UL2651 28 AWG flat cable
(7 cores/0.127mm, jacket dia. : 0.8 to 1.0mm).
■Product Specifications
Note 1 : Includes temperature rise caused by current flow.
Note 2 : The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Rating
Current rating : 1A
Operating Temperature Range
:
–55 to +85ç
(
Note 1
)
Storage Temperature Range : –10 to +60ç
(
Note 2
)
Voltage rating : 200V AC Operating Moisture Range : 40 to 80%
Storage Humidity Range : 40 to 70%
(
Note 2
)
■Materials / Finish
Item Specification Condition
1. Insulation Resistance 1000M
Ω
min 500V DC
2. Withstanding voltage
No flashover or insulation breakdown.
650V AC/1 minute
3. Contact Resistance 15m
Ω
max 0.1A
4. Vibration
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Insulation resistance : 1000M
Ω
min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle No damage, cracks, or parts looseness.
(-65ç : 30 minutes ➝ 15 to 35ç : 5 minutes max.
125ç : 30 minutes ➝ 15 to 35ç : 5 minutes max.) 5 cycles
7.
Resistance to Soldering heat
No deformation of components affecting performance.
Solder bath : 260ç for 10 seconds
Manual soldering : 360ç for 5 seconds
Part Material Finish Remarks
Insulator PBT
Black HIF2E-*D-2.54R B
UL94V-0
Gray HIF2E-*D-2.54R A
Contact Copper alloy Gold plated over nickel underplated ––––––
HIF2E -
**
D - 2.54 RB
qewrt
q Series Name : HIF2E
w Number of Contacts :
10, 14, 16, 20, 26, 30, 34, 40, 50, and 60
e Contact alignment : D : Double
r Contact Pitch : 2.54mm
t Connection method and contact plating type
RB : Universal type circuit plated
RA : Hirose original circuit plated
■
Product Number Structure
Refer to the chart below when determining the product specifications from the product number.
Please select from the product numbers listed in this catalog when placing orders.
Apr.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
