APEM www.apem.com
HS series
Sealed 5-way switch based miniature joystick
Distinctive features and specifications
5-way with center pushbutton option
Positive tactile feedback
MOM-OFF-MOM action
Threaded bush mount option
Sealed to IP68 and IP69K
Connectorized housing
CURRENT/VOLTAGE RATING WITH RESISTIVE LOAD
CONTACT RATING LIFECYCLES
• Gold plated (G) – 10mA @ 30VDC – 200,000 operations
• Silver plated (S) – 100mA @ 30VDC – 100,000 operations
• Mechanical life – 300,000 operations
• Insulation resistance – Min 100MΩ (250VDC by insulation resistance meter)
• Voltage withstand – 500VAC for 1 minute
• Contact resistance – Max 200mΩ (by YHP4328A)
• Electrical function – MOM-OFF-MOM
MECHANICAL
• Operating Force: 5.56N±0.53N (1.25lbf±0.12lbf)
1
• Maximum Vertical Load: 200N (45lbf)
1
• Maximum Horizontal Load: 150N (33.7lbf)
1
• Lever travel: 30° (±150)
• Mass/weight: 17g (0.0375lb) (Option HS1DXXXA)
ENVIRONMENTAL
• Sealing: IP68, IP69K²
• Operating temperature: -250C to +800C (-13°F to +176°F)
PUSHBUTTON SWITCH (Option 6 Handle)
• Electrical life: 100,000 cycles
• Rating: 50 mA,12VDC
• Terminal: Brass with silver plating
• Contact resistance: 100 milliohms max.
• Insulation resistance: 100 megohms min. 500VDC
• Dielectric strength: 250VAC /1 minute
• Contact arrangement: 1 pole 1 throw
• Operation force: 1.5lbf
• Stop strength: Max 3kgf vertical static load for 15 seconds
• Operating temperature: -250C to +700C (-13°F to +158°F)
• Storage temperature: -300C to +850C (-22°F to +185°F)
TERMINATION
• Manufacturer: Molex
• Manufacturer part number: 501331-0607
• Product range: Pico-Clasp ™
• Circuits: Six
• Pitch: 1.00mm
• Mating connector: Molex 501330-0600
OPTIONAL MATING HARNESS
3
• Wire type : 28AWG 25cm PTFE
• Connector: Molex 501330-0600
NOTES:
1. Force applied to the top of the castle cap.
2. All options are IP68 and IP69K rated, however Drop-in mounting does not prevent panel ingress.
3. The HS Series tactile toggle switch is fitted with a six terminal Molex (501331-0607) connector. A mating harness is not included,
but may be specified at the time of order for an additional charge. The 4-function harness is part number 505-508. The 5-function
harness, necessary for the Option 6 Handle is part number 505-509.
- All values are nominal.
Note: The company reserves the right to change specifications without notice.