https://www.phoenixcontact.com/pi/products/1748875
08/18/2018Page2/4
Printed-circuit board connector-ISPC 5/ 3-STGCL-7,62-1748875
Technical data
General
Connection method Push-in spring connection
Insulating material group I
Rated surge voltage (III/3) 8 kV
Rated surge voltage (III/2) 8 kV
Rated surge voltage (II/2) 6 kV
Rated voltage (III/3) 1000 V
Rated voltage (III/2) 1000 V
Rated voltage (II/2) 1000 V
Connection in acc. with standard EN-VDE
Nominal current I
N
41 A
Nominal cross section 6 mm²
Maximum load current 41 A
Insulating material PA
Flammability rating according to UL 94 V0
Stripping length 15 mm
Connection data
Conductor cross section solid min. 0.2 mm²
Conductor cross section solid max. 10 mm²
Conductor cross section flexible min. 0.2 mm²
Conductor cross section flexible max. 6 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min. 0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min. 0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max. 4 mm²
Conductor cross section AWG min. 24
Conductor cross section AWG max. 8
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
1.5 mm²
Minimum AWG according to UL/CUL 24
Maximum AWG according to UL/CUL 8
Specifications for ferrules
Recommended crimping pliers 1212034 CRIMPFOX 6
Ferrules without insulating collar, according to DIN46228‑1 Cross section:0.5 mm²; Length: 10 mm ... 15 mm
Cross section:0.75 mm²; Length: 10 mm ... 15 mm
Cross section:1 mm²; Length: 10 mm ... 15 mm
Cross section:1.5 mm²; Length: 12 mm ... 15 mm
Cross section:2.5 mm²; Length: 12 mm ... 15 mm
Cross section:4 mm²; Length: 12 mm ... 15 mm