SDP2000-L

Datasheet SDP2000-L
www.sensirion.com Version 1 April 2017 7/8
4. Shipping Package
SDP2000-L is shipped in trays of 25pcs.
5. Ordering Information
Use the part names and item numbers shown in the following table when ordering SDP2000-L differential pressure
sensor. For the latest product information and local distributors, visit www.sensirion.com.
Part name
Description / Output
Product number
SDP2000-L
3500Pa, Analog linear voltage output
1-100113-03
Revision History
Date
Author
Version
Changes
April 2017
ANB
1
Separate datasheet for SDP2000-L.
Specifications are unchanged.
Datasheet SDP2000-L
www.sensirion.com Version 1 April 2017 8/8
Important Notices
Warning, personal injury
Do not use this product as safety or emergency stop devices or
in any other application where failure of the product could
result in personal injury (including death). Do not use this
product for applications other than its intended and authorized
use. Before installing, handling, using or servicing this product,
please consult the datasheet and application notes. Failure to
comply with these instructions could result in death or serious
injury.
If the Buyer shall purchase or use SENSIRION products for any
unintended or unauthorized application, Buyer shall defend,
indemnify and hold harmless SENSIRION and its officers,
employees, subsidiaries, affiliates and distributors against all claims,
costs, damages and expenses, and reasonable attorney fees arising
out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if
SENSIRION shall be allegedly negligent with respect to the design
or the manufacture of the product.
ESD Precautions
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage
and/or degradation, take customary and statutory ESD precautions
when handling this product.
See application note “Handling Instructions for more information.
Warranty
SENSIRION warrants solely to the original purchaser of this product
for a period of 12 months (one year) from the date of delivery that
this product shall be of the quality, material and workmanship
defined in SENSIRION’s published specifications of the product.
Within such period, if proven to be defective, SENSIRION shall
repair and/or replace this product, in SENSIRION’s discretion, free
of charge to the Buyer, provided that:
notice in writing describing the defects shall be given to
SENSIRION within fourteen (14) days after their appearance;
such defects shall be found, to SENSIRION’s reasonable
satisfaction, to have arisen from SENSIRION’s faulty design,
material, or workmanship;
the defective product shall be returned to SENSIRION’s factory
at the Buyer’s expense; and
the warranty period for any repaired or replaced product shall
be limited to the unexpired portion of the original period.
This warranty does not apply to any equipment which has not been
installed and used within the specifications recommended by
SENSIRION for the intended and proper use of the equipment.
EXCEPT FOR THE WARRANTIES EXPRESSLY SET FORTH
HEREIN, SENSIRION MAKES NO WARRANTIES, EITHER
EXPRESS OR IMPLIED, WITH RESPECT TO THE PRODUCT.
ANY AND ALL WARRANTIES, INCLUDING WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE, ARE EXPRESSLY
EXCLUDED AND DECLINED.
SENSIRION is only liable for defects of this product arising under
the conditions of operation provided for in the datasheet and proper
use of the goods. SENSIRION explicitly disclaims all warranties,
express or implied, for any period during which the goods are
operated or stored not in accordance with the technical
specifications.
SENSIRION does not assume any liability arising out of any
application or use of any product or circuit and specifically disclaims
any and all liability, including without limitation consequential or
incidental damages. All operating parameters, including without
limitation recommended parameters, must be validated for each
customer’s applications by customer’s technical experts.
Recommended parameters can and do vary in different applications.
SENSIRION reserves the right, without further notice, (i) to change
the product specifications and/or the information in this document
and (ii) to improve reliability, functions and design of this product.
Copyright © 2017, SENSIRION.
CMOSens
®
is a trademark of Sensirion
All rights reserved
Headquarters and Subsidiaries
SENSIRION AG
Laubisruetistr. 50
CH-8712 Staefa ZH
Switzerland
phone: +41 44 306 40 00
fax: +41 44 306 40 30
info@sensirion.com
www.sensirion.com
Sensirion Inc., USA
phone: +1 312 690 5858
info-us@sensirion.com
www.sensirion.com
Sensirion Japan Co. Ltd.
phone: +81 3 3444 4940
info-jp@sensirion.com
www.sensirion.co.jp
Sensirion Korea Co. Ltd.
phone: +82 31 337 7700~3
info-kr@sensirion.com
www.sensirion.co.kr
Sensirion China Co. Ltd.
phone: +86 755 8252 1501
info-cn@sensirion.com
www.sensirion.com.cn
Sensirion Taiwan Co. Ltd.
phone: +41 44 306 40 00
info@sensirion.com
To find your local representative,
please visit
www.sensirion.com/contact

SDP2000-L

Mfr. #:
Manufacturer:
Sensirion
Description:
Board Mount Pressure Sensors Differ Pressure Senso
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet