K–
24
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
RTBV Series
1-2 Pole Coded Rotary Switches
Features/Benefits
•
Totally sealed
•
Detent angles, 15 , 22.5 , 30 and 36
•
Multi pole
•
Coding functions
•
Robust construction
Typical Applications
•
Telecommunications
•
Military
•
Instrumentation
•
Heavy-duty industrial equipment
Electrical Data Silver Gold
SWITCHING MODE: BBM* BBM*
MAX. SWITCHING POWER: 5VA 0.2VA
MAX. SWITCHING CURRENT
: 250 mA 20 mA
MIN. SWITCHING CURRENT: 10 mA 1 mA
MAX. CARRYING CURRENT: 5A 1A
MAX. VOLTAGE: 25V 25V
MIN. VOLTAGE: 5V 1V
BOUNCE: <5ms <5ms
CONTACT RESISTANCE after life: <100mΩ <100mΩ
DIALECTRIC STRENGTH between
contacts or contacts and frame: 500 V rms 500 V rms
INSULATION RESISTANCE between
contacts or contacts and frame: >10
9
Ω >10
9
Ω
Mechanical Data
NUMBER OF BANKS: 1 to 10
OPERATING TORQUE: 5 Ncm±30% (with 1 module)
MECHANICAL STOP RESISTANCE: >70 Ncm
BUSHING MOUNTING TORQUE: 100 Ncm
Materials
HOUSING: PBT thermoplastic and PC thermoplastic
STATIONARY CONTACTS & TERMINALS: Nickel plated Brass with
additional Gold or Silver plating, insert molded in PBT thermoplastic.
ROTOR: Printed cir
cuit, gold or silver plated.
ACTUATOR: Steel
BUSHING: Brass
HARDWARE: Stop pin and spring: Stainless steel
All models are RoHS compliant and compatible.
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages K-25 thru K-29. For additional options not shown in catalog, consult Customer Service Center.
Designation
RTBV
Indexing
1
15°/24 positions max.
2 22.5
°/16 positions max.
3 30°/12 positions max.
4 36°/10 positions max.
Number
of Banks**
1
1 Bank
2 2 Banks
3 3 Banks
4 4 Banks
Switch Function Number of Poles or code (binary
code = B, complement = C, direct +complement
= BC) (first digit), Stop (with=S, without=W),
Maximum Position (thir
d & fourth digit)
1S02
SP, 02 positions with stop
1S03 SP, 03 positions with stop
1S04 SP
,
04 positions with stop
1S05 SP
,
05 positions with stop
1S06 SP, 06 positions with stop
1S07 SP, 07 positions with stop
1S10 SP
,
10 positions with stop
1W10 SP, 10 positions without stop
1S11 SP
,
11 positions with stop
1S12 SP
, 12 positions with stop
1W12 SP, 12 positions without stop
Shaft Diameter & Style***
N
Metric shaft .236 (6,0)
P Standard shaft .250 (6,35)
F Metric shaft with flat .236 (6,0)
G Standard shaft with flat .250 (6,35)
S Metric shaft with slot .236 (6,0)
T Standard shaft with slot
.250 (6,35)
Actuator Length
Z
(.984) 25 mm
Contact Material
S
Silver plated, matte-tin terminal
P Gold plated, matte-tin terminal
Seal
A
Standard bushing for panel mount
D Sealed bushing for panel mount
* Other angles available by request
** Several functions can be combined. For mor
e information consult us.
Actuator Option Angle*
N
None for actuators without a flat
0 0° angle
3 30
°
angle
6 60° angle
9 90° angle
2 120
°
angle
8 180° angle
7 270° angle
Environmental Data
OPERATING TEMPERATURE: -25
0
C to +70
0
C
STORAGE TEMPERATURE: -40
0
C to +85
0
C
TOT
ALLY SEALED: Immersion test acc. to MIL
R22.097 F and NFC 20631/QF
* BBM= Break Before Make (non-starting)
1S14 SP, 14 positions with stop
1S16 SP
, 16 positions with stop
1W16 SP, 16 positions without stop
1S24 SP, 24 positions with stop
1W24 SP, 24 positions without stop
2S04 DP
,
4 positions with stop
2S05 DP, 5 positions with stop
2S06 DP, 6 positions with stop
GS_ _ Gray Code with stop
(indicate position)
GW_ _Gray Code without stop
(indica
te position) only can be 10,12, 16, 24 based on indexing
BS_ _ Binary Code with stop
(indicate position)
BW_ _Binar
y Code without stop
(indica
te position) only can be 10,12,
16,
24 based on indexing
CS_ _ Complement with stop
(indicate position)
CW_ _Complement without stop
(indicate position) only can be 10,12, 16, 24 based on indexing
ES_ _ Direct+
Complement with stop
(indica
te position)
EW_ _ Direct+Complement without stop
(indicate position) only can be 10,12, 16, 24 based on indexing
***Note: Metric diameter shafts ar
e only available with metric diameter bushings, standar
d 1.250 inch
diameter shafts ar
e only available with standar
d 3/8 diameter bushings.
NOTE: S&T Shaft Diameter and Style are only available with Actuator Option angle 0, 6, 9, 2.
