For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
SWITCHES - SPDT - SMT
6
HMC349ALP4CE
v01.0314
HIGH ISOLATION SPDT
Non-Reflective Switch, DC - 4 GHz
Evaluation PCB
The circuit board used in the application should
be generated with proper RF circuit design tech-
niques. Signal lines at the RF port should have 50
Ohm impedance and the package ground leads
and backside ground slug should be connected
directly to the ground plane similar to that shown
above. The evaluation circuit board shown above is
available from Hittite Microwave Corporation upon
request.
List of Materials for Evaluation PCB
106975 - HMC349ALP4C
[1]
Item Description
J1 - J3
PC Mount SMA RF Connector
J4 - J8 DC Pin
C1 - C4 100 pF Capacitor, 0402 Pkg.
U1
HMC349ALP4CE
SPDT Switch
PCB
[2]
106965 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
