OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

4030-006-120

P1-P3
SENSOR SOLUTIONS /// Model 4020 & 4030 Rev B 9/2015
Page 1
MODEL 4020 & 4030
ACCELEROMETER
SPECIFICATIONS
DC Response, Silicon MEMS
Dual & Triaxial Output Options
Low Cost, Great Value
±2g & ±6g Measurement Range
Rugged Construction
The Model 4020 & 4030 are low noise, signal conditioned
DC accelerometers packaged in a durable molded housing.
The accelerometers are offered in ±2g & ±6g ranges with a
nominal 0-200Hz bandwidth. The model 4020 is a dual axis
configuration (X&Y axes) while model 4030 is a triaxial
configuration. The capacitive silicon MEMS sensing
element offers high resolution and long term stability for
critical measurement applications.
FEATURES
5-30Vdc Excitation Voltage
Environmentally Sealed
Low Pass Filtered Output
Capacitive Silicon MEMS Element
Integral #24 AWG Cable
Self-Test Enabled
APPLICATIONS
Low Frequency Vibration Monitoring
Tilt & Inclination Measurement
Motion Measurements
Structural Monitoring
dimensions
MODEL 4020 & 4030 ACCELEROMETER
SENSOR SOLUTIONS /// Model 4020 & 4030 Rev B 9/2015
Page 2
PERFORMANCE SPECIFICATIONS
All values are typical at +24°C, 10Hz and 5Vdc excitation unless otherwise stated. Measurement Specialties reserves the right to update
and change these specifications without notice.
Parameters
DYNAMIC
Notes
Range (g)
±2
Sensitivity (mV/g)
1000
±10%
Frequency Response (Hz)
0-200
±5%
Non-Linearity (%FSO)
±1
Transverse Sensitivity (%)
<3
Shock Limit (g)
2000
Residual Noise (µV RMS)
600
Passband
Residual Noise (µg/√Hz RMS)
50
Self Test Output Change (mV)
X = +210 ±90
Ground ST Lead
Y = -210 ±90
Z = -340 ±190
ELECTRICAL
Zero Acceleration Output (V)
2.5 ±0.1
Excitation Voltage (Vdc)
5 to 30
Excitation Current (mA)
4
Full Scale Output Voltage (Vdc)
±2
Ground Isolation
Isolated from Mounting Surface
ENVIRONMENTAL
Thermal Zero Shift (%FSO)
±4
-40° to +85°C
Thermal Sensitivity Shift (%)
±5
-40° to +85°C
Operating Temperature (°C)
-40 to 85
Humidity
Epoxy Sealed, IP65
PHYSICAL
Housing Material
Nylon 6-6, 30% GF, Brass Inserts at Mounting Holes
Weight (grams)
50
Mounting
2x ¼ or M6 Screws
Mounting Torque
18 lb-in (2.0 N-m)
Optional accessories: 121 3-Channel Precision Low Noise DC Amplifier
The information in this sheet has been carefully reviewed and is believed to be accurate; however, no responsibility is assumed for inaccuracies. Furthermore, this
information does not convey to the purchaser of such devices any license under the patent rights to the manufacturer. Measurement Specialties, Inc. reserves the right
to make changes without further notice to any product herein. Measurement Specialties, Inc. makes no warranty, representation or guarantee regarding the suitability
of its product for any particular purpose, nor does Measurement Specialties, Inc. assume any liability arising out of the application or use of any product or circuit and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. Typical parameters can and do vary in different applications.
All operating parameters must be validated for each customer application by customer’s technical experts. Measurement Specialties, Inc. does not convey any license
under its patent rights nor the rights of others.
MODEL 4020 & 4030 ACCELEROMETER
SENSOR SOLUTIONS /// Model 4020 & 4030 Rev B 9/2015
Page 3
ORDERING INFO
PART NUMBERING Model Number+Range+Cable Length
40XX-GGG-CCC
l l l____Cable Length (120 is 120 inches)
l l________Range (002 is ±2g)
l___________Dual or Triaxial Configuration (4020; Dual Axis, 4030; Triaxial)
Example: 4030-002-120
Model 4030 (triaxial), ±2g range, 120 inch cable length
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
1000 Lucas Way
Hampton, VA 23666
Sales and Customer Service
Tel: +1-800-745-8008 or
+1-757-766-1500
Fax: +1-757-766-4297
t&m@meas-spec.com
EUROPE
MEAS France SAS
a TE Connectivity Company
26 Rue des Dames
F78340 Les Clayes-sous-Bois
France
Sales and Customer Service
Tel: +33 (0) 1 79 33 00
Fax: +33(0)1 34 81 03 59
t&m@meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North)
Nanshan District, Shenzhen 518057
China
Sales and Customer Service
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
t&m@meas-spec.com
P1-P3

4030-006-120

Mfr. #:
Buy 4030-006-120
Manufacturer:
TE Connectivity / Measurement Specialties
Description:
Accelerometers ACCELEROMETER TRIAXIAL,6G,120"
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet