SMART1500

SmartPro 120V 1.5kVA 980W Line-Interactive

UPS, Tower, USB, DB9, 6 Outlets

MODEL NUMBER: SMART1500

Protects connected mission-critical equipment against damage, downtime and data loss due to blackouts,

brownouts, power surges and line noise. Ideal solution for point-of-sale applications, VoIP systems and

small business networks.

Description

The SMART1500 SmartPro 120V 1.5kVA 980W Line-Interactive UPS provides battery backup and AC

power protection against blackouts, brownouts, power surges and line noise that can damage electronics

battery status. An alarm sounds to indicate power failure, overload or a low battery.

Automatic voltage regulation (AVR) maintains 120V nominal output over an input range of 75V to 147V

without using battery power. EMI/RFI noise filtering improves your equipment’s performance and prevents

damage. A 480-joule surge suppression rating protects your equipment from harmful power surges. With

Tripp Lite’s PowerAlert software (available via free download), the SMART1500 enables safe unattended

system shutdown and file saves in case of a prolonged power failure.

Features

Protects Mission-Critical Equipment

Provides fully regulated AC output for point-of-sale applications, VoIP systems and small business

networks

●

6 NEMA 5-15R outlets—1

switchable via network interface

●

Front-panel LEDs indicate load,

power and battery statuses

●

Monitoring of power conditions

via PowerAlert®

●

UPS

●

USB cable

●

DB9 cable

●

Owner’s manual

●

1 / 5

6 NEMA 5-15R outlets

6 ft. power cord with 120V NEMA 5-15P input

●

Reliable Battery Backup

Supports half load up to 20 min. and full load up to 7 min.

●

Internal batteries designed for hot-swap field replacement

●

96% line-power efficiency rating saves money in energy costs

●

Cold-start capability enables turn-on in battery mode during blackouts

●

EMI/RFI Line Noise Filtering

Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s

performance

●

LED Indicators

Front-panel LEDs indicate line power, battery power, overload, voltage regulation and battery status

●

Communications Ports

USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert

software, available via FREE download from www.tripplite.com/poweralert

OUTPUT

Output Volt Amp Capacity (VA) 1500

Output kVA Capacity (kVA) 1.5

Output Watt Capacity (Watts) 980

2 / 5

Nominal Output Voltage(s)

Supported

110V; 115V; 120V

Nominal Voltage Details 120v nominal output in battery mode

Frequency Compatibility 60 Hz

Output Voltage Regulation (Line

Mode)

Load Management Receptacles One switchable single-outlet 5-15R load bank

PWM sine wave

Nominal Input Voltage(s) Supported 120V AC

UPS Input Connection Type 5-15P

Input Circuit Breakers 15A

UPS Input Cord Length (ft.) 7

UPS Input Cord Length (m) 2.1

Recommended Electrical Service 15A 120V

Input Phase Single-Phase

BATTERY

Full Load Runtime (min.) 7 min. (980w)

Expandable Runtime No

VOLTAGE REGULATION

Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 75 to 147

Overvoltage Correction Input voltages between 128 and 147 are reduced by 12%

3 / 5