https://www.phoenixcontact.com/pi/products/1512555
08/18/2018Page2/4
Connector-SACC-M12MS-5SC SH-1512555
Technical data
General
Number of positions 5
Insulation resistance ≥ 100 MΩ
Coding A - standard
Standards/regulations M12 connector IEC61076-2-101
Shock, vibration EN 50155:2001 for conductor cross section of 0.14
mm² ... 0.34 mm²
Status display No
Overvoltage category II
Degree of pollution 3
Connection method Spring-cage connection
Conductor cross section 0.14 mm² ... 0.5 mm²
Conductor cross section AWG 26 ... 20
Insertion/withdrawal cycles ≥ 100
Torque 0.4 Nm (M12 knurl)
0.8 Nm (Connector with coupling sleeve)
3 Nm (Pressure nut with coupling sleeve)
Assembly instructions The wires can be connected both with ferrules and without ferrules
Material
Flammability rating according to UL 94 V0
Contact material CuSn
Contact surface material Ni/Au
Contact carrier material PA 6.6
Material of grip body Zinc die-cast, nickel-plated
Material, knurls Nickel-plated brass
Sealing material NBR
Standards and Regulations
Standard designation M12 connector
Standards/regulations IEC61076-2-101
Standard designation Shock, vibration
Standards/regulations EN 50155:2001
Connection in acc. with standard CUL
Flammability rating according to UL 94 V0
Environmental Product Compliance
REACh SVHC Lead 7439-92-1
China RoHS Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings