MC10EP142, MC100EP142
www.onsemi.com
7
Table 5. 10EP DC CHARACTERISTICS, PECL V
CC
= 3.3 V, V
EE
= 0 V (Note 4)
Symbol
Characteristic
−40°C 25°C 85°C
Unit
Min Typ Max Min Typ Max Min Typ Max
I
EE
Negative Power Supply Current 105 125 145 105 125 145 105 125 145 mA
V
OH
Output HIGH Voltage (Note 5) 2165 2290 2415 2230 2355 2480 2290 2415 2540 mV
V
OL
Output LOW Voltage (Note 5) 1365 1490 1615 1430 1555 1680 1490 1615 1740 mV
V
IH
Input HIGH Voltage (Single−Ended) 2090 2415 2155 2480 2215 2540 mV
V
IL
Input LOW Voltage (Single−Ended) 1365 1690 1460 1755 1490 1815 mV
V
IHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 6)
2.0 3.3 2.0 3.3 2.0 3.3 V
I
IH
Input HIGH Current (@ V
IH
) 150 150 150
mA
I
IL
Input LOW Current (@ V
IL
)
CLK0, CLK1, D, S−IN
CLK0
, CLK1, S−IN
0.5
−150
0.5
−150
0.5
−150
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm.
4. Input and output parameters vary 1:1 with V
CC
. V
EE
can vary +0.3 V to −2.2 V.
5. All loading with 50 W to V
CC
− 2.0 V.
6. V
IHCMR
min varies 1:1 with V
EE
, V
IHCMR
max varies 1:1 with V
CC
. The V
IHCMR
range is referenced to the most positive side of the differential
input signal.
Table 6. 10EP DC CHARACTERISTICS, PECL V
CC
= 5.0 V, V
EE
= 0 V (Note 7)
−40°C 25°C 85°C
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
I
EE
Negative Power Supply Current (Note 8) 105 125 145 105 125 145 105 125 145 mA
V
OH
Output HIGH Voltage (Note 9) 3865 3990 4115 3930 4055 4180 3990 4115 4240 mV
V
OL
Output LOW Voltage (Note 9) 3065 3190 3315 3130 3255 3380 3190 3315 3440 mV
V
IH
Input HIGH Voltage (Single−Ended) 3790 4115 3855 4180 3915 4240 mV
V
IL
Input LOW Voltage (Single−Ended) 3065 3390 3130 3455 3190 3515 mV
V
IHCMR
Input HIGH Voltage Common Mode
Range (Differential Configuration)
(Note 10)
2.0 5.0 2.0 5.0 2.0 5.0 V
I
IH
Input HIGH Current (@ V
IH
) 150 150 150
mA
I
IL
Input LOW Current (@ V
IL
)
CLK0, CLK1, D, S−IN
CLK0
, CLK1, S−IN
0.5
−150
0.5
−150
0.5
−150
mA
NOTE: Device will meet the specifications after thermal equilibrium has been established when mounted in a test socket or printed circuit
board with maintained transverse airflow greater than 500 lfpm.
7. Input and output parameters vary 1:1 with V
CC
. V
EE
can vary +2.0 V to −0.5 V.
8. Required 500 lfpm air flow when using +5 V power supply. For (V
CC
− V
EE
) >3.3 V, 5 W to 10 W in line with V
EE
required for maximum thermal
protection at elevated temperatures. Recommend V
CC
− V
EE
operation at 3.3 V.
9. All loading with 50 W to V
CC
− 2.0 V.
10.V
IHCMR
min varies 1:1 with V
EE
, V
IHCMR
max varies 1:1 with V
CC
. The V
IHCMR
range is referenced to the most positive side of the differential
input signal.
Table 7. 10EP DC CHARACTERISTICS, NECL V
CC
= 0 V, V
EE
= −5.5 V to −3.0 V (Note 11)
−40°C 25°C 85°C
Symbol Characteristic Min Typ Max Min Typ Max Min Typ Max Unit
I
EE
Negative Power Supply Current
(Note 12)
105 125 145 105 125 145 105 125 145 mA
V
OH
Output HIGH Voltage (Note 13) −1135 −1010 −885 −1070 −945 −820 −1010 −885 −760 mV
V
OL
Output LOW Voltage (Note 13) −1935 −1810 −1685 −1870 −1745 −1620 −1810 −1685 −1560 mV