DATA SHEET
SE2564L: 2.4 GHz High Efficiency Wireless LAN Front-End
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
202423A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 25, 2012 3
Absolute Maximum Ratings
These are stress ratings only. Exposure to stresses beyond these maximum ratings may cause permanent damage
to, or affect the reliability of the device. Avoid operating the device outside the recommended operating conditions
defined below. This device is ESD sensitive. Handling and assembly of this device should be at ESD protected
workstations.
Symbol Definition Min. Max. Unit
VCC Supply Voltage on VCC -0.3 5.5 V
VIN DC input on EN, C1, C2, C3, C4 -0.3 3.6 V
TX
RF Input Power. ANT0 and ANT1 terminated in
50Ω match
- 12.0 dBm
TA Operating Temperature Range -30 85 °C
TSTG Storage Temperature Range -40 150 °C
ESD
HBM
JEDEC JESD22-A114 all pins - 150 V
ESD
CDM
JESD22-C101E all pins - 300 V
Recommended Operating Conditions
Symbol Parameter Min. Typ. Max. Unit
TA Ambient temperature -30 25 85 °C
VCC
VCC1, VCC2 supply voltage 2.9 3.3 5.5 V
VCC0 supply voltage (may use GPIO) 2.7 - 3.6 V
DC Electrical Characteristics
Conditions: VCC = EN = 3.3 V, TA = 25 °C, as measured on Skyworks Solutions’ SE2564L-EK1 evaluation board
(de-embedded to device), all unused ports terminated with 50 ohms, unless otherwise noted
Symbol Parameter Conditions Min. Typ. Max. Unit
ICC-G Total Supply Current
POUT = 17 dBm, 54 Mbps
OFDM signal, 64QAM
- 130 - mA
ICC-B Total Supply Current
P
OUT
= 19 dBm, 11 Mbps
CCK signal, BT = 0.45
- 160 - mA
ICQ Total Supply Current No RF - 85 - mA
Icntl Control Line Current C1, C2, C3 or C4 = 3.3V 1 10 μA
Icc0 Supply Current on VCC0 No RF, VCC0 = 3.3V - 70 100 μA
ICC_OFF Total Supply Current
No RF Applied, EN = R0 =
T0 = T1 = R1 = VCC0 = 0 V
- 1 10 μA
No RF Applied, EN = R0 =
T0 = T1 = R1 = 0 V; VCC0
= 3.3V
- 71 110 μA
