8
Moisture Sensitivity
This product is quali ed as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this mois-
ture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note
AN5305 Handling of Moisture Sensitive Surface Mount Devices for details.
A. Storage before use
- Unopen moisture barrier bag (MBB) can be stored at <40°C/90%RH for 12 months. If the actual shelf life has
exceeded 12 months and the HIC indicates that baking is not required, then it is safe to re ow the LEDs per the
original MSL rating.
- It is not recommended to open the MBB prior to assembly (e.g. for IQC).
B. Control after opening the MBB
- The humidity indicator card (HIC) shall be read immediately upon opening of MBB.
- The LEDs must be kept at <30°C / 60%RH at all time and all high temperature related process including solder-
ing, curing or rework need to be completed within 672 hours.
C. Control for un nished reel
- For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH.
D. Control of assembled boards
- If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be
stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their oor life of
672 hours.
E. Baking is required if:
- “10%” is Not blue and “5%” HIC indicator turns pink.
- The LEDs are exposed to condition of >30°C / 60% RH at any time.
- The LEDs oor life exceeded 672 hours.
Recommended baking condition: 60±5°C for 20 hours.
Figure 16. Reeling Orientation
CATHODE SIDE
USER FEED DIRECTION
PRINTED LABEL
