Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com
NON-ISOLATED DC/DC CONVERTERS
4.5 Vdc - 14 Vdc Input 0.75 Vdc - 5.0 Vdc/3 A Output
Input Specifications (continued)
Parameter Min Typ Max Notes
Input Reflected Ripple Current (pk-pk)
Vo=5.0 V
Vo=3.3 V
Vo=0.75 V
-
-
-
150 mA
100 mA
35 mA
200 mA
150 mA
45 mA
Input Reflected Ripple Current (rms)
Vo=5.0 V
Vo=3.3 V
Vo=0.75 V
-
-
-
30 mA
20 mA
8 mA
40 mA
35 mA
15 mA
Tested with simulated source
impedance of 1uH, 5 Hz to 20 MHz and
two 100 uF/25 V external input
Tantalum capacitors.
I
2
t Inrush Current Transient - 0.01 A
2
s 0.02 A
2
s
Turn-on Voltage Threshold
Vo set=5 V
Vo set≤3.3 V
-
-
5.5 V
4.3 V
6.5 V
4.5 V
Turn-off Voltage Threshold
Vo set=5 V
Vo set≤3.3 V
3.8 V
3.8 V
5.5 V
4.0 V
6.0 V
4.3 V
Output Specifications
Parameter Min Typ Max Notes
Output Voltage Set Point -2%Vo,set - 2%Vo,set Vin=12 V, lo=lomax
Output Voltage Set Point -3.5%Vo,set - 2.5%Vo,set
Over all operating input
voltage, resistive load, and
temperature conditions
Load Regulation 0.4%Vo,set 0.2%Vo,set 0.4%Vo,set lo=lomin to lomax
Line Regulation 0.4%Vo,set 0.3%Vo,set 0.4%Vo,set Vin=Vinmin to Vinmax
Regulation Over Temperature
(-40 °C to +85 °C)
- 0.5%Vo,set -
Output Current 0 A - 3 A
Current Limit Threshold 5 A - 9.5 A
Short Circuit Surge Transient - 0.1A
2
s 0.2 A
2
s
Ripple and Noise (pk-pk)
Vo=5.0 V
Vo=3.3 V
Vo=0.75 V
-
-
-
100 mV
80 mV
55 mV
120 mV
100 mV
80 mV
Ripple and Noise (rms)
Vo=5.0 V
Vo=3.3 V
Vo=0.75 V
-
-
-
30 mV
20 mV
15 mV
40 mV
30 mV
20 mV
Test conditions:
0-20 MHz BW, with external
10 uF/10 V Tantalum capacitor
and 1uF/10V ceramic capacitor
at the output.
Ripple and Noise (pk-pk)
Vo=5.0 V
Vo=3.3 V
Vo=0.75 V
-
-
-
60 mV
40 mV
20 mV
80 mV
50 mV
30 mV
Ripple and Noise
(rms)
Vo=5.0 V
Vo=3.3 V
Vo=0.75 V
-
-
-
15 mV
12 mV
5 mV
25 mV
20 mV
10 mV
Test conditions:
0-20 MHz BW, with external
10 uF/10 V Tantalum capacitor
1uF/10V ceramic capacitor and
two 22 uF/10 V ceramic
capacitors at the output.
Turn on Time - 8 mS 12 mS
Overshoot at Turn on - 0% 3%
Output Capacitance 0 uF - 1200 uF
Transient Response
50% ~ 100% Max Load - 150 mV 200 mV
Settling Time - 25 uS 40 uS
100% ~ 50% Max Load - 150 mV 200 mV
Settling Time
All
- 25 uS 40 uS
Test conditions: di/dt = 2.5 A/uS,
Vin=12 V, and with external
10 uF/10 V Tantalum capacitor and
1uF/10 V ceramic capacitor at the
output.
Note: All specifications are typical at nominal input (Vin=12 V), full load at 25 °C unless otherwise stated.