Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Plastic Film Capacitors
1 2 3 4 5 6 7 8 9 10 11
E C W U 1 5JX
Product code Dielectric &
construction
Cap. Tol. SuffixRated voltage Capacitance Suffix
Code
5
Tape width
8 mm
J ±5 %
1 100 V.DC
Element
(Stacked)
Outer
electrode
L±0.2
W±0.2
H±0.2
e±0.30
e±0.30
g
Speci cations
●
Small in size (minimum size 3.2 mm × 1.6 mm)
●
85 °C, 85 %RH, W.V. × 1.0 for 500 hours
●
For refl ow soldering
●
RoHS directive compliant
●
General purpose (Coupling, By-pass)
Stacked metallized PEN fi lm as dielectric with simple
mold-less construction
Features
Stacked Metallized PEN
Film Chip Capacitor
Type : ECWU(X)
Category temp. range
(Including temperature-rise on unit surface)
– 55 °C to +105 °C
Rated voltage 100 V.DC
Capacitance range 0.0010 µF to 0.010 µF (E12)
Capacitance tolerance ±5 %(J)
Dissipation factor (tan d) tan d < 1.0 % ( 20 °C, 1 kHz )
Withstand voltage Between terminals : Rated volt. (V.DC)×150 %, 60 s
Insulation resistance (IR) IR > 3000 MΩ (20 °C, 100 V.DC, 60 s)
Soldering conditions
Refl ow soldering : 250 °C max. and 60 s max. at more than 220 °C
(Temp. at capacitor surface)
✽
In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage,
please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”.
Size
code
LWHe g
H2 3.2 1.6 1.1
0.65
>
1.0
H3 3.2 1.6 1.5
0.65
>
1.0
G2 3.2 2.5 1.5
0.65
>
1.0
G3 3.2 2.5 2.1
0.65
>
1.0
Unit : mm
Explanation of part number
Construction Dimensions
Recommended applications
Feb. 201601
