DATA SHEET • SMP1330 SERIES DIODES
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2 June 30, 2016 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200050N
Electrical and Mechanical Specifications
The absolute maximum ratings of the SMP1330 series are
provided in Table 1.
The part numbers and configurations for the SMP1330 series are
provided in Table 2. Electrical specifications are provided in
Table 3. Typical 1 GHz limiter performance measurements are
provided in Table 4.
Input power versus output power performance for the SMP1330
series is illustrated in Figure 1. Package dimensions are shown in
Figures 2 (SOT-23) and 4 (SOD-882). Tape and reel dimensions
are provided in Figures 3 (SOT-23) and 5 (SOD-882).
Package and Handling Information
Instructions on the shipping container label regarding exposure to
moisture after the container seal is broken must be followed.
Otherwise, problems related to moisture absorption may occur
when the part is subjected to high temperature during solder
assembly.
The SMP1330 series is rated to Moisture Sensitivity Level 1
(MSL1) at 260 C. These diodes can be used for lead or lead-free
soldering. For additional information, refer to the Skyworks
Application Note, Solder Reflow Information, document number
200164.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
Table 1. SMP1330 Series Absolute Maximum Ratings
1
Parameter Symbol Minimum Maximum Units
Reverse voltage VR 20 V
Forward current IF 100 mA
CW incident power @ 25 °C lead temperature 1 W
Peak incident power @ 1% duty factor, 1 μs pulse 100 W
Power dissipation @ 25 °C lead temperature PD 250 mW
Storage temperature TSTG –65 +150 C
Operating temperature TA –65 +150 C
1
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set
at or below their nominal value.
ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device.
This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce
potentials of several kilovolts on the human body or equipment, which can discharge without detection.
Industry-standard ESD handling precautions should be used at all times.
Table 2. Part Number and Configuration
Series Pair Single
SOT-23 SOD-882
SMP1330-005LF
Green™
Marking: RQ2
SMP1330-040LF
Green™
Marking: F
L
S
= 1.5 nH L
S
= 0.45 nH
The Pb-free symbol or “LF” in the part number denotes a lead-free, RoHS-compliant package unless
otherwise noted as Green™. Tin/lead (Sn/Pb) packaging is not recommended for new designs.
