PCR11

© 2016 Littelfuse Protection Relays & Controls
Flashers and Tower Lighting Controls
Tower and Obstruction Lighting Controls
www.littelfuse.com/pcr
Rev: 1-A-062316
Wiring Diagram
PCR SERIES
Photo Control
Description
The PCR Series of photo controls is a combination of precision
electronic circuitry, electromechanical output, and unique
molded plastic housing. Designed and built to meet the
demands of the most rigorous requirement of tower and
obstruction lighting control, each unit is factory calibrated to
meet FAA and FCC specifications. Electronic circuit, output
contactor, and terminal block are all contained within front
plastic housing. Edge support molded into the bottom edge of
housing allows easy wiring of new and existing installations.
Available with or without cast aluminum junction box.
Operation
When the amount of light sensed falls below the actuation level
for energization, the output relay energizes. Conversely, when
the amount rises above the actuation level for de-energization,
the output relay de-energizes.
Features & Benefits
FEATURES BENEFITS
ABS plastic housing with
gasket seal
Withstands outdoor environmental hazards and
protects circuitry from moisture damage
Two 20A relay contacts
Allows direct control of a lighting circuit without a
separate contactor
Fixed time delay Eliminates contact chatter
Reliable photo sensor
Provides automatic lighting circuit operation from
dusk to dawn
Ordering Information
MODEL INPUT DESCRIPTION
REPLACES
Hughey
& Phillips
Crouse
Hinds
PCR10
120VAC
Photo Control without
aluminum box
n/a n/a
PCR11
120VAC
Photo Control without
aluminum box
PC800 120V PEC52010
PCR12
230VAC
Photo Control with
aluminum box
n/a n/a
PCR13
230VAC
Photo Control with
aluminum box
PC800 240V PEC52010-1
If you don’t find the part you need, call us for a custom product 800-843-8848
Dashed lines are internal connections.
Dashed lines are internal connections.
Dashed lines are internal connections.
Dashed lines are internal connections.
*Customer Supplied Jumper
Dashed lines are
internal connections.
© 2016 Littelfuse Protection Relays & Controls
Flashers and Tower Lighting Controls
Tower and Obstruction Lighting Controls
www.littelfuse.com/pcr
Rev: 1-A-062316
PCR SERIES
Specifications
Indication LED indicates power is applied
Light Actuation Levels
(Factory Calibrated) Energized: ≤ 35 fc
De-energized: ≥ 60 fc
Voltage 120VAC or 230VAC
AC Line Frequency 50/60Hz
Tolerance
120 & 230VAC -20% - 10%
Output Rating Two SPST NO 20A contacts
1 hp @ 120VAC
2.5 hp @ 240VAC
Termination Screw terminals for up to #8 (M4 x 0.7)
AWG wire
Dimensions H 159.51 mm (6.28”); W 127 mm (5.0”);
D 131.75 mm (5.19”)
Mounting ABS plastic housing with gasket seal. Multiple
knockout holes for optional mounting to
Crouse Hinds or Hughey & Phillips cast
aluminum electrical boxes.
Operating/Storage
Temperature -40° to 60°C / -55° to 85°C

PCR11

Mfr. #:
Manufacturer:
Littelfuse
Description:
Solid State Relays - Industrial Mount PHOTOELECTRICCONTROL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet