317
Amphenol Corporation Tel: 800-627-7100 www.amphenolrf.com
Assembly
Assembly Instructions-C47 Amphenol
®
SMA
Step 1
Step 2
Step 3a,b
Step 1 Clean cable end for .625"(16mm) min. length. Trim cable
jacket and dielectric to dimension shown. Do not nick
center conductor. Remove burrs from jacket and center
conductor.
Step 2 Solder contact to center conductor. Use .015"(.4mm) shim
to accurately maintain space between jacket, dielectric and
contact. Remove all excess solder.
Step 3a Assemble cable and contact into connector body. Cable
jacket and dielectric to be flush with shoulder of body as
shown. Solder cable to connector body. Avoid excessive
heat which may distort dielectric.
Step 3b Press fit insulator into connector body. Bottom insulator in
connector body as shown.
Amphenol Connector Cable Dim
Number Type S/R a
901-9201-2A SMA Plug .085(2.2) .125(3.2)
901-9201-2ASF SMA Plug .085(2.2) .125(3.2)
901-9202-1A SMA Jack .141(3.6) .125(3.2)
901-9202-2A SMA Jack .085(2.2) .125(3.2)
901-9210-1 SMA Bulkhead Jack .141(3.6) .125(3.2)
901-9210-2 SMA Bulkhead Jack .085(2.2) .125(3.2)
901-9867-RFX SMA Plug .085(2.2) .098(2.5)
901-9868-RFX SMA Plug .141(3.6) .098(2.5)