THL 10-1222 Datasheet THL-HS1, THN-HS1, THL 10-4811 | P1-P3

http://www.tracopower.com Page 1 of 4

DC/DC Converters

THL 10 Series, 10 Watt

Features

◆

10 Watt in 1” x 1” package

◆ Shielded metal case with isolated

baseplate

◆ Wide 2:1 input voltage ranges

◆ Operating temp. range –40°C to +80°C

and up to +85°C with heat-sink

◆ I/O isolation voltage 1500 VDC

◆ Input ﬁlter meets EN 55022 class A

without external components

◆ Cost optimized design

◆ Industry standard pinout

◆ 3-year product warranty

The THL 10 is a series of general purpose 10 Watt dc/dc-converters packed in the

compact 1” x 1” case and is a pin to pin replacement for the popular 1” x 2” size

products. The industrial standard pinout, the wide 2:1 input voltage range and the

input ﬁlter that meets EN 55022 Class A without external components make these

converters easy to design in and suitable for to cost optimize many existing and new

applications.

The models have short circuit and overvoltage protection and are applicable in tem-

perature ranges of up to +80°C or +85°C with optional mounted heat sink. Typical

applications are instrumentation, distributed power architectures in communication

and industrial electronics.

Order code Input voltage range Output voltage Output current max. Efﬁciency typ.

THL 10-1210

3.3 VDC 2500 mA 82 %

THL 10-1211

5.1 VDC 2000 mA 85 %

THL 10-1212

12 VDC 830 mA 87 %

THL 10-1213 9 – 18 VDC

15 VDC 670 mA 88 %

THL 10-1221

(12 VDC nominal)

±5.0 VDC ±1000 mA 84 %

THL 10-1222

±12 VDC ±416 mA 87 %

THL 10-1223

±15 VDC ±333 mA 87 %

THL 10-2410

3.3 VDC 2500 mA 83 %

THL 10-2411

5.1 VDC 2000 mA 85 %

THL 10-2412

12 VDC 830 mA 87 %

THL 10-2413 18 – 36 VDC

15 VDC 670 mA 89 %

THL 10-2421

(24 VDC nominal)

±5.0 VDC ±1000 mA 85 %

THL 10-2422

±12 VDC ±416 mA 88 %

THL 10-2423

±15 VDC ±333 mA 89 %

THL 10-4810

3.3 VDC 2500 mA 83 %

THL 10-4811

5.1 VDC 2000 mA 85 %

THL 10-4812

12 VDC 830 mA 89 %

THL 10-4813 36 – 75 VDC

15 VDC 670 mA 89 %

THL 10-4821

(48 VDC nominal)

±5.0 VDC ±1000 mA 86 %

THL 10-4822

±12 VDC ±416 mA 87 %

THL 10-4823

±15 VDC ±333 mA 88 %

Models

Scheme

UL 60950-1UL 60950-1

pending

226037

http://www.tracopower.com Page 2 of 4

DC/DC Converters

THL 10 Series 10 Watt

Input Specifications

Input current at no load (at nominal input voltage) 12 Vin models: 15 mA typ.

24 Vin models: 12 mA typ.

48 Vin models: 10 mA typ.

Input current at full load (at nominal input voltage) 12 Vin; 3.3 VDC models: 800 mA typ.

12 Vin; other models: 1000 mA typ.

24 Vin; 3.3 VDC models: 400 mA typ.

24 Vin; other models: 500 mA typ.

48 Vin; 3.3 VDC models: 200 mA typ.

48 V; other models: 250 mA typ.

Start-up voltage / under voltage lockout 12 Vin models: 9.0 / 8.5 VDC (or lower)

(hysteresis for assertive on) 24 Vin models: 18 / 17 VDC (or lower)

48 Vin models: 36 / 34 VDC (or lower)

(long term operation at undervoltage will

demage the converter!)

Surge voltage (1 sec. max.) 12 Vin models: 25 V max.

24 Vin models: 50 V max.

48 Vin models: 100 V max.

Conducted noise (input) EN 55022 class A, FCC part 15, level A

without external components

ESD (electrostatic discharge) EN 61000-4-2, air ±8 kV, contact ±6 kV,

perf. criteria A

Radiated immunity EN 61000-4-3, 10 V/m, perf. criteria A

Fast transient / Surge EN 61000-4-4, ±2 kV, perf. criteria A

EN 61000-4-5, ±1 kV perf. criteria A

with external capacitor

Conducted immunity EN 61000-4-6, 10 Vrms, perf. criteria A

Output Specifications

Voltage set accuracy ±2 %

Regulation – Input variation (Vmin – Vmax) 1.0 % max.

– Load variation single output models: 0.5 % max. (0 – 100 % load)

dual output models: 1.0 % max. (0 – 100 % balanced load)

cross regulation: 5 % max. (25% / 100% asymmetrical load)

Minimum load not required

Ripple and noise (20 MHz bandwidth) 3.3 & 5.0 VDC models: 80 mVp-p typ.

other models: 100 mVp-p typ.

Temperature coefficient ±0.02 %/K

Output current limitation >110 % of Iout max.

Short circuit protection hiccup, automatic recovery

Transient response setting time 300 µs typ. (25 % load step change)

Maximum capacitive load 3.3 VDC models: 4700 µF

5.1 VDC models: 2200 µF

12 VDC models: 330 µF

15 VDC models: 220 µF

±5.0 VDC models: 1000 µF (each output)

±12 VDC models: 150 µF (each output)

±15 VDC models: 100 µF (each output)

http://www.tracopower.com Page 3 of 4

All speciﬁcations valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

DC/DC Converters

THL 10 Series 10 Watt

General Specifications

Temperature ranges – Operating without heat sink –40°C to +80°C (with derating)

– Operating with heat sink –40°C to +85°C (with derating)

– Case temperature +100°C max.

– Storage –50°C to +125°C

Power derating – Operating without heat sink 2.5 %/K above +60°C

– Operating with heat sink 3.5 %/K above +70°C

Humidity (non condensing) 95 % rel H max.

Reliability, calculated MTBF (MIL-HDBK-217F, at +25°C, ground benign) 2’596’000 h

Isolation voltage (60 sec.) – Input/Output 1’500 VDC

Isolation capacitance – Input/Output 2000 pF max.

Isolation resistance – Input/Output (500 VDC) >1’000 MOhm

Switching frequency (fixed) 300 kHz typ. (pulse width modulation PWM)

Altitude during operation 5‘000 m max. (16‘40 0 f t ) approved

Safety standards UL/cUL 60950-1, IEC/EN 60950-1

– Certification documents (pending) www.tracopower.com/overview/thl10

Environmental compliance – Reach www.tracopower.com/products/reach-declaration.pdf

– RoHS RoHS directive 2011/65/EU

Physical Specifications

Casing material metal

Baseplate non conductive FR4

Potting material epoxy (UL 94V-0 rated)

Pin material tinned copper

Weight 15 g (0.53oz)

Soldering temperature max. +260°C / 10sec.

P1-P3 P4-P4

THL 10-1222

Mfr. #:

Buy THL 10-1222

Manufacturer:

TRACO Power

Description:

Isolated DC/DC Converters 9-18Vin 12V 416mA, -12Vout 416mA

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

THL 10-1222

THL 10-1222

Products related to this Datasheet