P708.F (01/17)1
pulseelectronics.com
High Isolation Power Transformers
EP7 Platform SMD
Push Pull Transformer
Reinforced insulation for isolated power supply driver
8mm creepage
5KVrms isolation (600Vrms continuous)
UL and TUV certified
USA 858 674 8100 Germany 49 2354 777 100 Singapore 65 6287 8998 Shanghai 86 21 62787060 China 86 755 33966678 Taiwan 886 3 4356768
Electrical Specifications @ 25°C - Operating Temperature -40°C to +125°C
Part
Number
Inductance
(1-3)
(µH ±45%)
DCR (1-3)
(Ω MAX)
DCR (4-6)
(Ω MAX)
MAX (1-3)
1
(V-µsec Max)
Turns Ratio
(1:3) (6:4)
Isolated Voltage
2
(Vrms)
PH9185.011NL 750 0.50 0.55 66 1CT : 1CT
PH9185.012NL 450 0.40 0.80 52 1CT : 2CT
PH9185.013NL 200 0.35 0.95 36 1CT : 3CT
PH9185.021NL 1800 0.75 0.45 100 2CT : 1CT 5000
PH9185.034NL 750 0.50 0.75 66 3CT : 4CT
PH9185.038NL 310 0.44 1.00 44 3CT : 8CT
PH9185.043NL 1260 0.70 0.56 89 4CT : 3CT
PH9185.083NL 2350 0.90 0.40 110 8CT : 3CT
Notes:
PH9185.XXXXNL
Mechanical Schematic
Weight ...................2.6grams
Tape & Reel ...............150/reel
Tray .............................80/tray
Dimensions:
Unless otherwise specified,
all tolerances are ±
Inches
mm
.010
0,25
1. The maximum volt-usec rating limits the peak flux density to 3600 gauss when
used in bi-polar drive application with 200KHz. For unipolar drive applications or a
bi-polar drive with 350kHz, a maximum volt-usec could be 60% of the listed value.
For Push-Pull topology, where the voltage is applied across half the primary wind-
ing turns, the maximum volts-use needs to be derated by 50%.
2. The AEC-Q200 temperature and humidity operational life testing was completed
using a dielectric strength test of 5000Vdc.
3. Optional Tape & Reel packing can be ordered by adding a “T” sux to the part
number (i.e. PH9185.012NL becomes PH9185.012NLT). Pulse complies to industry
standard tape and reel specification EIA481.
4. The “NL” sux indicates an RoHS-compliant part number.
5. Continuous isolation voltage confirmed by 125°C/1000hrs accelerated aging with the
bias voltage applied between primary and secondary windings.
2
1
3
5
6
4
PH9185.XXXNL
CTRY MFG
DATE CODE
SCHEMATIC
(.394)
([10.00])
3
1
.100[2.54]
.100X2[2.54X2]
.047[1.20]
.394MAX[10.00]
SUGGESTED LAND PAT TERN
.512 MAX
(.378)
[9.60]
.100±.008
[2.54±.20]
.016±.002
[.40±.05]
1
3
6
4
3
1
Primary
Primary
Secondary
Secondary
.079 REF
.079 REF
[2.00] REF
2X.100[2.54]
1
3
4
6
6 PLACES
.005[.13]
.492 MAX
[12.50 MAX]
.370
[9.40]
.520
[13.21]
C US
R
E119132 F2