Dimensions are shown inch (mm)
Dimensions subject to change
www.ittcannon.com
H-7
DIP
H
How To Order
Complete part numbers for SD Series are shown on pages H-7 thru H-8. All switches supplied in “OFF” position in rigid
dispensing tubes or tape and reel packaging.
Specifications
SWITCH FUNCTION: SPST - 2, 3, 4, 5, 6, 7, 8, 9, 10 & 12
positions
CONTACT RATING:
Carry: 100 mA @ 50 V DC max.
Switch: 0.1 mA @ 5 V DC min to 100 mA @ 25 V DC max.
MECHANICAL AND ELECTRICAL LIFE: 2,000 make-and-break
cycles at full load, each circuit.
CONTACT RESISTANCE: Below 50 milliohms typ. initial
@ 2-4 V DC, 100mA.
INSULATION RESISTANCE: 10
9
ohms min.
DIELECTRIC STRENGTH: 500 V RMS min. @ sea level between
adjacent terminals.
STORAGE & OPERATING TEMPERATURE: -40°C to 85°C.
OPERATING TEMPERATURE: -20°C to 85°C.
QUANTITY
PART NUMBER NO.POS. DIM.
‘
A’ PER TUBE
SD02H0K 2 .258 (6,55) 85
SD03H0K 3 .358 (9,09) 60
SD04H0K 4 .458 (11,63) 45
SD05H0K 5 .558 (14,17) 40
SD06H0K 6 .658 (16,71) 30
SD07H0K 7 .758 (19,25) 25
SD08H0K 8 .858 (21,79) 25
SD09H0K 9 .958 (24,33) 20
SD10H0K 10 1.058 (26,87) 20
SD12H0K 12 1.258 (31,95) 15
Schematic
SPST
C&K SD Series
Low Profile DIP Switches
PACKAGING: Thru-hole switches supplied in rigid dispensing tubes in
full-tube quantities only: this may effect order quantity. Surface
mount switches available in tape and reel packaging by added ‘R’
to end of part number; 1,000 pieces per reel. Switch position 1
denotes pin number 1. All switch actuators in ‘OFF’ position,
standard.
Materials
CASE & COVER: Thru-hole: polyester (PBT). Surface Mount: (PPA),
flame retardant (UL 94V-0).
ACTUATOR: Nylon, flame retardant (UL 94V-0)
CONTACTS: Copper alloy with gold plate.
TERMINALS: Copper alloy with tin lead plate.
TERMINAL SEAL: All terminals insert molded.
TAPE SEAL: Polyester
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Features/Benefits
• Low profile design saves space
• Thru-hole and surface mount
models
• Tape and reel packaging
available
• Sealed with top tape
Sealed Flush Actuator - With Top Tape, Thru-hole Terminals
Process sealed - withstands soldering and cleaning processes
.010 TYP.
.023 TYP.
DIM. 'A'
.325 TYP.
.315 TYP.
.168 TYP.
.126 TYP.
.100 TYP.
.022 TYP.
.059 TYP.
