OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MKP1840515255M

P1-P3P4-P6P7-P9P10-P12P13-P13
MKP 1840 M
Vishay Roederstein
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com
Document Number: 26018
156 Revision: 01-Jul-10
INSPECTION REQUIREMENTS
General Notes:
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-2 and
Specific Reference Data”.
Group C Inspection Requirements
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
SUB-GROUP C1A PART OF SAMPLE
OF SUB-GROUP C1
4.1 Dimensions (detail) As specified in chapter “General Data” of this
specification
4.3.1 Initial measurements Capacitance
Tangent of loss angle at 10 kHz
4.3 Robustness of terminations Tensile and bending No visible damage
4.4 Resistance to soldering heat Method: 1A
Solder bath: 280 °C ± 5 °C
Duration: 5 s
4.14 Component solvent resistance Isopropylalcohol at room temperature
Method: 2
Immersion time: 5 min ± 0.5 min
Recovery time: Min. 1 h, max. 2 h
4.4.2 Final measurements Visual examination No visible damage
Legible marking
Capacitance C/C| 2 % of the value measured initially
Tangent of loss angle Increase of tan
0.002
Compared to values measured in 4.3.1
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.6.1 Initial measurements Capacitance
Tangent of loss angle: at 100 kHz
No visible damage
4.15 Solvent resistance of the marking Isopropylalcohol at room temperature
Method: 1
Rubbing material: cotton wool
Immersion time: 5 min ± 0.5 min
No visible damage
Legible marking
4.6 Rapid change of temperature A = lower category temperature
B = upper category temperature
5 cycles
Duration t = 30 min
4.7 Vibration Visual examination
Mounting:
See section “Mounting” of this specification
Procedure B4
Frequency range: 10 Hz to 55 Hz
Amplitude: 0.75 mm or
Acceleration 98 m/s²
(whichever is less severe)
Total duration 6 h
No visible damage
Legible marking
4.7.2 Final inspection Visual examination No visible damage
4.9 Shock Mounting:
See section “Mounting” for more information
Pulse shape: Half sine
Acceleration: 490 m/s²
Duration of pulse: 11 ms
Document Number: 26018 For technical questions, contact: dc-film@vishay.com
www.vishay.com
Revision: 01-Jul-10 157
MKP 1840 M
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
Vishay Roederstein
SUB-GROUP C1B PART OF SAMPLE
OF SUB-GROUP C1
4.9.3 Final measurements Visual examination No visible damage
Capacitance C/C| 2 % of the value measured in 4.6.1
Tangent of loss angle Increase of tan 0.002
Compared to values measured in 4.6.1
Insulation resistance As specified in section “Insulation
Resistance” of this specification
SUB-GROUP C1 COMBINED SAMPLE
OF SPECIMENS OF SUB-GROUPS
C1A AND C1B
4.10 Climatic sequence
4.10.2 Dry heat Temperature: upper category temperature
Duration: 16 h
4.10.3 Damp heat cyclic
Test Db, first cycle
4.10.4 Cold Temperature: lower category temperature
Duration: 2 h
4.10.6 Damp heat cyclic
Test Db, remaining cycles
4.10.6.2 Final measurements Visual examination No visible damage
Legible marking
Capacitance C/C| 3 % of the value measured in
4.4.2 or 4.9.3
Tangent of loss angle Increase of tan  0.003
Compared to values measured in
4.3.1 or 4.6.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C2
4.11 Damp heat steady state
4.11.1 Initial measurements
Capacitance
Tangent of loss angle at 1 kHz
4.11.3 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 3 % of the value measured in
4.11.1.
Tangent of loss angle Increase of tan 0.002
Compared to values measured in 4.11.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-GROUP C3
4.12 Endurance Duration: 2000 h
x U
Rdc
at 85 °C
0.875 x U
Rdc
at 100 °C
4.12.1 Initial measurements Capacitance
Tangent of loss angle at 100 kHz
4.12.5 Final measurements Visual examination No visible damage
Legible marking
Capacitance |C/C| 3 % compared to values measured
in 4.12.1
Tangent of loss angle Increase of tan  0.004
Compared to values measured in 4.12.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
MKP 1840 M
Vishay Roederstein
AC and Pulse Metallized Polypropylene Film Capacitors
MKP Radial Potted Type
www.vishay.com For technical questions, contact: dc-film@vishay.com
Document Number: 26018
158 Revision: 01-Jul-10
SUB-GROUP C4
4.2.6 Temperature characteristics
Initial measurements Capacitance
Intermediate measurements Capacitance at lower category temperature
Capacitance at 20 °C
Capacitance at upper category temperature
For - 55 °C to + 20 °C:
0 % |C/C| 2 % or
For 20 °C to 85 °C
- 3 % |C/C| 0 %
As specified in section “ Capacitance” of this
specification
Final measurements Capacitance
Insulation resistance
Asspecified in section “Insulation
Resistance” of this specification
SUB-GROUP C4
4.13 Charge and discharge 10 000 cycles
Charged to U
Rdc
Discharge resistance:
4.13.1 Initial measurements Capacitance
Tangent of loss angle at 100 kHz
4.13.3 Final measurements Capacitance |C/C| 3 % compared to values measured
in 4.13.1
Tangent of loss angle Increase of tan 0.005
Compared to values measured in 4.13.1
Insulation resistance 50 % of values specified in section
“Insulation Resistance” of this specification
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
R
U
R
2.5 C dU dt
----------------------------------------------
=
P1-P3P4-P6P7-P9P10-P12P13-P13

MKP1840515255M

Mfr. #:
Buy MKP1840515255M
Manufacturer:
Vishay
Description:
Film Capacitors MKP 1,5 F 10% 250Vdc Pitch 22,5 mm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet