TS78M05A
3-Terminal 500mA Positive Voltage Regulator
Document Number:
DS_P0000266
1
Version: E15
(DPAK)
General Description
The TS78M05A Series positive voltage regulators are identical to the popular TS7805 Series devices, except that
they are specified for only half the output current. Like the TS7805 devices, the TS78M05A Series 3-Terminal
regulators are intended for local, on-card voltage regulation.
Internal current limiting, thermal shutdown circuitry and safe-area compensation for the internal pass transistor
combine to make these devices remarkably rugged under most operating conditions. Maximum output current with
adequate heatsink is 500mA
Features
● Output Voltage 5V
● Output current up to 500mA
● Internal thermal overload protection
● Internal short-circuit current limiting
● Output transistor safe-area compensation
● Output voltage offered in 2% tolerance
Standard Application Circuit
A common ground is required between the input and
the output voltages. The input voltage must remain
typically 2.0V above the output voltage even during
the low point on the Input ripple voltage.
XX = these two digits of the type number indicate
voltage.
* = Cin is required if regulator is located an
appreciable distance from power supply filter.
** = Co is not needed for stability; however, it does
improve transient response.
Ordering Information
Part No. Package
Packing
TS78M05ACP ROG
TO-252 2.5Kpcs / 13” Reel
Note: “G” denotes for Halogen Free
Absolute Maximum Rating
(Ta = 25°C unless otherwise noted)
Parameter Symbol Limit Unit
Input Voltage V
IN
* 35 V
Power Dissipation P
D
Internal Limited W
Operating Junction Temperature T
J
0~+125 °C
Storage Temperature Range T
STG
-65~+150 °C
Thermal Resistance - Junction to Case RӨ
JC
8 °C/W
Thermal Resistance - Junction to Ambient RӨ
JA
100 °C/W
1. Input
2. Ground (tab)
3. Output