OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

D6F-W10A1

P1-P2
31
D6F-W
MEMS Flow Sensor
A Compact Sensor That Uses
OMRON’s Unique Flow Path Structure for
High-performance Flow Rate Measurement.
• Anti-dust performance enhanced by OMRON’s unique three-dimensional
flow path structure.
• High accuracy of ±5% FS.
Ordering Information
MEMS Flow Sensor
Accessory (Sold separately)
Connections
Output Voltage Characteristics
D6F-W01A1
D6F-W04A1
The flow velocity is the value calculated from the mass flow rate in OMRON’s specified
48-mm-dia. wind tunnel. It does not indicate the flow velocity determined by the Mea-
surement Law of Japan. The wind tunnel conditions are shown in Figure 1, below.
Measurement conditions: Power supply voltage of 12 VDC, ambient tempera-
ture of 25°C, and ambient humidity of 35% to 75%.
D6F-W10A1
The flow velocity is the value calculated from the mass flow rate in OMRON’s specified
155-mm-dia. wind tunnel. It does not indicate the flow velocity determined by the Mea-
surement Law of Japan. The wind tunnel conditions are shown in Figure 2, below.
Measurement conditions: Power supply voltage of 12 VDC and ambient temper-
ature of 25°C
RoHS Compliant
Refer to the Common Precautions for the D6F Series on page 40.
Applicable fluid Flow rate range Model
Air
0 to 1 m/s D6F-W01A1
0 to 4 m/s D6F-W04A1
0 to 10 m/s D6F-W10A1
Ty p e Model
Cable D6F-W CABLE
Enlarged View
2. Vout.
3. GND.
1. Vcc.
Pin No. 1: Vcc
2: Vout
3: GND
Connector S3B-ZR-SM2-TF
(made by J.S.T. Mfg. Co.)
D6F-W01A1
D6F-W04A1
D6F-W10A1
Use the following connectors from
J.S.T. Mfg. Co. Ltd. to connect the D6F:
Housing: ZHR-3
Contacts: SZH-002T-P0.5
Wires: AWG28 to AWG26
Or
Contacts: SZH-003T-P0.5
Wires: AWG32 to AWG28
Flow velocity
m/s
0 0.25 0.50 0.75 1.00
Output voltage V
1.00±0.2 1.35±0.2 2.01±0.2 3.27±0.2 5.00±0.2
Flow velocity
m/s
0 1.0 2.0 3.0 4.0
Output voltage V
1.00±0.2 1.58±0.2 2.88±0.2 4.11±0.2 5.00±0.2
Flow velocity
m/s
0 2.0 4.0 6.0 8.0 10.0
Output voltage V
1.00
±
0.24 1.94
±
0.24 3.23
±
0.24 4.25
±
0.24 4.73
±
0.24 5.00
±
0.24
6.0
5.0
4.0
3.0
2.0
1.0
0.250.00 1.000.750.50
0.0
Output voltage (V)
Flow velocity (m/s)
1.00.0 4.03.02.0
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Output voltage (V)
Flow velocity (m/s)
6.0
5.0
4.0
3.0
2.0
1.0
0.0
02468 10
Output voltage (V)
Flow velocity (m/s)
D6F-W01A1 D6F-W04A1
D6F-W10A1
48 dia.
60 20.8
Air volume sensor
Flow velocity measurement
position
Figure 1: Wind Tunnel
100
10
18
155 dia.
Honeycomb flow grate
Air volume sensor
Flow velocity measurement position
Figure 2: Wind Tunnel
32
D6F-W MEMS Flow Sensor
Characteristics/Performance
Note: 1. Volumetric flow rate at 25°C, 101.3 kPa.
Note: 2. Dry gas. (must not contain large particles, e.g., dust, oil, or mist.)
Note: 3. Reference (typical)
Note: 4. With no condensation or icing.
Dimensions (Unit: mm)
● Cable (Optional)
D6F-W CABLE
Model D6F-W01A1 D6F-W04A1 D6F-W10A1
Flow Range (See note 1.) 0 to 1 m/s 0 to 4 m/s 0 to 10 m/s
Calibration Gas (See note 2.) Air
Electrical Connection Three-pin connector
Power Supply 10.8 to 26.4 VDC
Current Consumption 15 mA max. with no load, with a Vcc of 12 to 24 VDC, and at 25°C
Output Voltage 1 to 5 VDC (non-linear output, load resistance of 10 kΩ)
Accuracy ±5% FS (25°C characteristic) ±6% FS (25°C characteristic)
Repeatability (See note 3.) ±0.4% FS
Output Voltage (Max.) 5.7 VDC (Load resistance: 10 kΩ)
Output Voltage (Min.) 0 VDC (Load resistance: 10 kΩ)
Rated Power Supply Voltage 26.4 VDC
Rated Output Voltage 6 VDC
Case PPS
Degree of Protection IEC IP40 (except for flow inlet and outlet)
Operating Temperature (See note 4.) −10 to 60°C
Operating Humidity (See note 4.) 35% to 85%
Storage Temperature (See note 4.) −40 to 80°C
Storage Humidity (See note 4.) 35% to 85%
Temperature Characteristics ±5% FS for 25°C characteristic at an ambient temperature of −10 to 60°C
Insulation Resistance Between Sensor outer cover and lead terminals: 20 MΩ min. (at 500 VDC)
Dielectric Strength Between Sensor outer cover and lead terminals: 500 VAC, 50/60 Hz min. for 1 min (leakage current: 1 mA max.)
Weight 6.3 g
MADE IN JAPAN
4.2
±0.2
3.2
±0.2
Two, R: 1.6
30.5
±0.2
19.5
2 dia., Depth: 2.5
3.2 ±0.2 dia.
4
5
Flow inlet
1.2
2.6
9
20
8
R4
R4
8
24 39
7
Flow outlet
Flow outlet
1.2
2.6
Two, M3 screws
Lot number label
30.5
±0.05
5
Mounting Hole Dimensions
● MEMS Flow Sensors
D6F-W01A1
D6F-W04A1
D6F-W10A1
P1-P2

D6F-W10A1

Mfr. #:
Buy D6F-W10A1
Manufacturer:
Omron Electronics
Description:
Flow Sensors MEMS Velocity Sensor 10m/sec
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet