The FN9263 power entry module combines an
IEC inlet, mains filter with excellent filter
attenuation and a mains switch in a small form
factor. Choosing the FN9263 product line brings
you the rapid availability of a standard filter
associated with the necessary safety
acceptances. Standard IEC connector filters are
a practical solution helping you to pass EMI
system approval in a short time. A wide selection
on amperage ratings and mounting possibilities
are designed to offer you the desired solution.
Features and benefits
Exceptional conducted attenuation
performance, based on chokes with high
saturation resistance and excellent thermal
behavior.
Rear/front or snap-in mounting.
Small compact housing fitting 1U rack
applications.
Versions up to 10A are available with 1 pole
rocker switch.
Custom-specific versions are available on
request.
Typical applications
Electrical and electronic equipment
Consumer goods
Household equipment
Medical equipment
Electronic data processing equipment
Office automation and datacom equipment
Various noisy applications requiring high filter
performance
IEC Inlet Filters
FN 9263
General Purpose Power Entry Module with
Mains Switch
Rated currents up to 10A
1-pole rocker switch
Snap-in versions (S and S1 type)
Compact to fit 1U rack size
Technical specifications
Canada (CSA): 10A, 250VAC; 1/4HP
Design corresponding to: UL 1283, CSA 22.2 No. 8 1986, IEC/EN 60939
Electrical specifications: Inrush current 78A
10,000 on-off operations according to UL 1054, TV
5
Flammability corresponding to: UL 94V-2 or better
Function: 1-pole, dark not illuminated
Marking I - 0
High potential test voltage for capacitors: P –> PE 2000VAC for 2 sec
P –> N 760VAC for 2 sec
Maximum continuous operating voltage: 250VAC, 50/60Hz
MTBF @ 40°C/230V (Mil-HB-217F): 6,500,000 hours
Operating frequency: 50 to 400Hz
Protection category: IP40 according to IEC 60529
Rated currents: 1 to 10 A @ 40°C max.
Rocker switch description:
Switch ratings:
Europe (ENEC): 10A (4A), 250VAC*
Temperature range (operation and storage): -25°C to +85°C (25/85/21)
USA (UL): 10A, 125VAC; 8A, 250VAC; 1/4HP
Typical electrical schematic