Model RN-800S
Roving Networks, a developer of wireless network appliances,
introduces the BlueSentry Bluetooth sensor interface.
BlueSentryconnects to many industry standard sensors to
provide wireless, network connected signal monitoring and
device control in industrial and commercial environments..
True Plug-and-play
BlueSentry contains a built in processor and smart Bluetooth radio. The
device is programmed over Bluetooth via simple ASCII characters. Both
ASCII and binary output formats are supported. Channels can be selected as
single ended or differential measurements.
Easy to setup and use
January, 2006
BlueSentry-XPert Bluetooth
TM
Sensor Interface
About the size of a standard business card, and less than 1” thick,
BlueSentry-AD easily attaches to sensor outputs, automatically
taking continuous measurements. Data is transferred wirelessly to
PC andPDAclients using Serial Port Profile. Or pair the BlueSentry
with the BluePort II or XP serial adapter and connect to any legacy
serial port! Software applications can control and acquire data as if
they were connected to a local serial port.
• 8 16 bit Input A/D channels 0-5VDC at up to 3000Hz sample rate.
• 2 on board FET switches for powering external sensors.
• 2 general purpose inputs/outputs (15ma drive) for control.
• High Power (Class 1 - 16db TX) – 100Meter Bluetooth™ radio with integral chip antennae.
• External SMA jack Antennae option, order RN-800S-E.
• Low power 6-12VDC (75ma) can run from 4-AAA batteries.
• Serial Port Profile enabled, slave or master mode capable.
• Low power sleep and wake on connect options.
•screw post (power in, 2 ch), RJ45 (power in, 6 ch) and 12 pin internal header connections.
•Small form factor: 1.6” X 3.0” X 0.9”
Features and Specifications
Roving Networks Incorporated Telephone: (408) 395-6539 http://www.rovingnetworks.com
431 Monterey Avenue, Suite 5 Facsimile: (603)-843-7550 email: info@rovingnetworks.com
Los Gatos, CA 95030
RN-800S-AD
RN-800S-CB
