2904961

https://www.phoenixcontact.com/us/products/2904961

05/18/2015Page1/5

Repeater power supply-MACX PL-RPSSI-2I-2904961

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

(http://phoenixcontact.com/download)

Measuring transducer power supply and input signal conditioner, HART-transparent. Transfers supplied or active

4 - 20 mA electrically isolated signals from the field to two loads. 4-way electrical isolation, PLd

Product Features

Country of origin Germany

Technical data

Note

Utilization restriction

EMC: class A product, see manufacturer's declaration in the download

area

Dimensions

Width 12.5 mm

Height 99 mm

Depth 114.5 mm

https://www.phoenixcontact.com/us/products/2904961

05/18/2015Page2/5

Repeater power supply-MACX PL-RPSSI-2I-2904961

Technical data

Ambient conditions

Noise immunity

EN 61000-6-2 When being exposed to interference, there may be minimal

deviations.

Degree of protection IP20

Input data

Signal input Repeater power supply operation

Current input signal 4 mA ... 20 mA

Transmitter supply voltage > 21.5 V (20 mA)

Current output signal 4 mA ... 20 mA (active)

Load/output load current output < 450 Ω (20 mA)

< 380 Ω (23mA)

Output ripple

< 20 mV

rms

Output behavior in the event of an error 0 mA (Cable break in the input)

0 mA (Cable short-circuit in the input)

Signal output Signal conditioner operation

Current output signal 4 mA ... 20 mA (active)

≥ 23 mA (Cable short-circuit in the input)

Power supply

Designation Repeater power supply operation

Supply voltage range 19.2 V DC ... 30 V DC (24 V DC (-20% ... +25%))

Max. current consumption < 75 mA (24VDC / 20mA)

Power consumption < 1.45 W (24 V DC/ 20 mA)

Connection data

Conductor cross section solid min. 0.2 mm²

Conductor cross section solid max. 2.5 mm²

Conductor cross section flexible min. 0.2 mm²

https://www.phoenixcontact.com/us/products/2904961

05/18/2015Page3/5

Repeater power supply-MACX PL-RPSSI-2I-2904961

Technical data

Connection data

Conductor cross section AWG min. 24

Tightening torque, min 0.5 Nm

Tightening torque max 0.6 Nm

General

Maximum transmission error < 0.1 % (of final value)

Transmission error, typical < 0.05 % (of final value)

Maximum temperature coefficient < 0.01 %/K

Step response (10-90%) < 1.3 ms (for 4 mA ... 20 mA step)

Status display Green LED (PWR supply voltage)

Inflammability class according to UL 94 V0

Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC

degree 2, safe isolation as per EN 61010-1))

2.5 kV (50 Hz, 1 min., test voltage)

Designation Output 1/output 2

Electrical isolation 1.5 kV AC (50 Hz, 1 min., test voltage)

Conformance CE-compliant, additionally EN 61326

ATEX  II 3 G Ex nA IIC T4 Gc X

Data communication (bypass)

HART function Yes

Protocols supported HART

EMC data

Designation Conducted interferences