2320542 Datasheet 2320542 | P1-P3

1Description

DC/DC converter with SFB technology, dip-coated,

primary-switched, input: 24 V DC, output: 24 V DC,

output current: 5A

QUINT-PS/24DC/24DC/ 5/CO

Data sheet

QUINT DC/DC converter – superior system availability from

SFB technology

Compact DC/DC converters from the new QUINT POWER

generation maximize your system availability. With SFB

technology (Selective Fuse Breaking Technology), 6-fold

nominal current for 12 ms, it is possible to trigger even stan-

dard circuit breakers reliably and quickly. Faulty current

paths are switched off selectively, the fault is located, and

important system parts remain in operation. Comprehensive

diagnostics are provided through constant monitoring of the

input voltage, output voltage and output current. Preventive

function monitoring visualizes critical operating states and

indicates them to the controller before errors can occur.

The application fields for DC/DC converters are numerous

– Changing the voltage level

– Refreshing the output voltage for constant voltage at

the end of long cables

– Setup of independent supply systems by electrical iso-

lation

Features

– Wide-range voltage input

– Galvanic isolation

– Reverse polarity protection

– Preventive function monitoring

– Reliable starting of difficult loads with POWER BOOST

static power reserve

– Fast tripping of standard circuit breakers with dynamic

SFB technology power reserve

– High MTBF > 890,000 h (40°C)

Flexible use

– Dip coating enables use in oxidizing and sulfidizing

atmospheres with humidities of up to 100 %

– Adjustable output voltage

– Can be used in Class I, Division 2, Groups A, B, C, D

(Hazardous Location) ANSI-ISA 12.12

Make sure you always use the latest documentation.

It can be downloaded from the product at phoenixcontact.net/products

105537_en_01

2014-02-13

QUINT-PS/24DC/24DC/ 5/CO

105537_en_01 PHOENIX CONTACT 2

2Table of contents

1 Description .............................................................................................................................. 1

2 Table of contents ..................................................................................................................... 2

3 Ordering data .......................................................................................................................... 3

4 Technical data ......................................................................................................................... 4

5 Safety regulations and installation notes.................................................................................. 8

6 Basic circuit diagram ............................................................................................................... 9

7 Structure.................................................................................................................................. 9

8 Installation ............................................................................................................................... 9

9 Dimensions and mounting positions...................................................................................... 10

10 Mounting on DIN rails ............................................................................................................ 11

10.1 Normal mounting position .................................................................................................... 11

10.2 Rotated mounting position (270° Y-axis).................................................................................. 11

11 Input ...................................................................................................................................... 11

11.1 Protection of the primary side ............................................................................................... 11

12 Output.................................................................................................................................... 12

12.1 Protecting the secondary side............................................................................................... 12

13 Output characteristic curve.................................................................................................... 12

14 SFB technology ..................................................................................................................... 13

14.1 Circuit breaker tripping characteristics .................................................................................... 13

14.2 Installation notes ............................................................................................................... 13

14.3 Deactivating SFB technology................................................................................................ 13

14.4 SFB configuration .............................................................................................................. 14

15 Signaling................................................................................................................................ 15

15.1 Active switching output “DC OK”............................................................................................ 15

15.2 Active switching output “I<IN” .............................................................................................. 15

15.3 Active switching output “UIN>19.2V” .................................................................................... 16

16 Derating................................................................................................................................. 16

16.1 Temperature-dependent derating .......................................................................................... 16

16.2 Voltage-dependent derating ................................................................................................. 16

16.3 Position-dependent derating................................................................................................. 17

17 Operating modes................................................................................................................... 20

17.1 Series operation ................................................................................................................ 20

17.2 Parallel operation............................................................................................................... 20

17.3 Redundant operation .......................................................................................................... 20

17.4 Increasing power ............................................................................................................... 21

QUINT-PS/24DC/24DC/ 5/CO

105537_en_01 PHOENIX CONTACT 3

Description Type Order No. Pcs. / Pkt.

Primary-switched QUINT DC/DC converter for DIN rail mounting, input: 24

V DC, output: 24 V DC/5 A, dip-coated PCB, with integrated SFB (selective

fuse breaking) technology, including mounted universal DIN rail adapter

UTA 107/30

QUINT-PS/24DC/24DC/ 5/CO 2320542 1

3Ordering data

Accessories Type Order No. Pcs. / Pkt.

Primary-switched QUINT power supply for DIN rail mounting, input: 1-

phase, output: 24 V DC/10 A, with integrated SFB (selective fuse breaking)

technology, including mounted universal DIN rail adapter UTA 107

QUINT-PS/ 1AC/24DC/10 2866763 1

Primary-switched QUINT power supply for DIN rail mounting, input: 1-

phase, output: 24 V DC/10 A, dip-coated PCB, with integrated SFB (selec-

tive fuse breaking) technology, including mounted universal DIN rail

adapter UTA 107

QUINT-PS/ 1AC/24DC/10/CO 2320911 1

Primary-switched QUINT power supply for DIN rail mounting, input: 3-

phase, output: 24 V DC/10 A, with integrated SFB (selective fuse breaking)

technology, including mounted universal DIN rail adapter UTA 107

QUINT-PS/ 3AC/24DC/10 2866705 1

Active QUINT redundancy module for DIN rail mounting with integrated

SFB (selective fuse breaking) technology and monitoring functions, input:

24 V DC, output: 24 V DC/2 x 10 A or 1 x 20 A, including mounted universal

DIN rail adapter UTA 107/30

QUINT-ORING/24DC/2X10/1X20 2320173 1

Universal DIN rail adapter UTA 107/30 2320089 25

Universal wall adapter UWA 182/52 2938235 1

Assembly adapter for QUINT-PS... power supply on S7-300 rail QUINT-PS-ADAPTERS7/1 2938196 1

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic

SFB, 1 PDT contact, plug for base element.

CB TM1 1A SFB P 2800836 1

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic

SFB, 1 PDT contact, plug for base element.

CB TM1 2A SFB P 2800837 1

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic

SFB, 1 PDT contact, plug for base element.

CB TM1 12A SFB P 2800844 1

Thermomagnetic device circuit breaker, 1-pos., tripping characteristic

SFB, 1 PDT contact, plug for base element.

CB TM1 16A SFB P 2800845 1

Our range of accessories is being continually extended, our current range can be found in the download area.

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21

2320542

Mfr. #:

Buy 2320542

Manufacturer:

Phoenix Contact

Description:

Isolated DC/DC Converters QUINT-PS/24DC 24DC/ 5/CO

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet

2320542