OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

TLP716(TP,F)

P1-P3P4-P6
TLP716
2014-09-01 1
Unit: mm
Weight：0.26 g (typ.)
4.58±0.25
4.0
+0.25
−0.20
9.7±0.3
6.8±0.25
0.4±0.1
1.27±0.2 1.25±0.25
7.62±0.25
3.65
+0.15
−0.25
0.25±
1 2 3
6 5 4
11-5J1
TOSHIBA 11−5J1
−0.05
+0.10
TOSHIBA Photocoupler GaAℓAs IRED & Photo−IC
TLP716
Plasma display panel
High Speed Interface
Factory Automation
The TOSHIBA TLP716 consists of a GaAℓAs light emitting diode and a high
speed photodetector. This unit is 6-lead SDIP. TLP716 is 50% smaller than
8PIN DIP and has suited the safety standard reinforced insulation class. So,
mounting area in safety standard required equipment can be reduced.
Inverter Logic (totempole output)
Package Type : SDIP6
Guaranteed Performance Over Temperature : −40~100°C
Power Supply Voltage: 4.5~5.5 V
Input Thresholds Current: I
FHL
= 6.5 mA (max)
Propagation delay Time (t
pHL
/t
pLH
): 75 ns (max)
Switching speed: 15 MBd (typ.) (NRZ)
Common mode transient immunity: 10 kV/μs (min)
Isolation voltage: 5000 Vrms (min)
UL Recognized: UL1577, File No.E67349
Option (D4)
TÜV Approved : EN60747−5−2
Maximum Operating Insulation Voltage :
890 V
PK
Highest Permissible Over Voltage
: 8000 V
PK
(Note):When a EN60747−5−2 approved type is needed,
Please designate “Option(D4)”
Construction Mechanical Rating
7.62 mm pitch
standard type
10.16 mm pitch
TLPXXXF type
Creepage Distance
Clearance
Insulation Thickness
7.0 mm (min)
7.0 mm (min)
0.4 mm (min)
8.0 mm (min)
8.0 mm (min)
0.4 mm (min)
Truth Table
Input LED Tr1 Tr2 Output
H
ON OFF ON L
L
OFF ON OFF H
VCC
GND
SHIELD
1
3
4
5
6
2
1:ANODE
2:N.C.
3:CATHODE
4:GND
5:Vo
6:Vcc
Pin Configuration (Top View)
0.1
μ
F bypass capacitor must be
connected between pins 6 and 4. (Note 4)
V
CC
V
O
GND
I
CC
I
O
6
5
4
SHIELD
3－
1＋
I
F
VF
Tr1
Tr2
Schematic
Start of commercial production
2006/06
TLP716
2014-09-01 2
Absolute Maximum Ratings (Ta=25°C）
CHARACTERISTIC SYMBOL RATING UNIT
LED
Forward Current (Ta ≤ 85°C) I
F
20 mA
Forward Current Derating (Ta > 85°C) ΔI
F
/ΔTa −0.5 mA/°C
Peak Transient Forward Current (Note1) I
FPT
1 A
Reverse Voltage V
R
5 V
Junction Temperature Tj 125 °C
DETECTOR
Output Current (Ta ≤ 85°C) I
O
10 mA
Output Current Derating (Ta > 85°C) Δ I
O
/ΔTa −0.25 mA/°C
Output Voltage (Vo ≤ Vcc) V
O
−0.5~6 V
Supply Voltage V
CC
−0.5~6 V
Power Dissipation (Ta ≤ 85°C) P
D
40 mW
Power Dissipation Derating (Ta > 85°C) ΔP
D
/ΔTa -1 m W /°C
Junction Temperature Tj 125 °C
Operating Temperature Range Topr −40~100 °C
Storage Temperature Range Tstg −55~125 °C
Lead Solder Temperature(10s) Tsol 260 °C
Isolation Voltage (AC,1 minute, R.H. ≤ 60%, Ta=25°C) (Note2) BV
S
5000 Vrms
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if
the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings and the operating ranges.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
(“Handling Precautions”/“Derating Concept and Methods”) and individual reliability data (i.e. reliability test
report and estimated failure rate, etc.).
Recommended Operating Conditions
CHARACTERISTIC SYMBOL MIN TYP. MAX UNIT
Input Current, ON IF(ON) 8 12 18 mA
Input Voltage, OFF VF(OFF) 0 — 0.8 V
Supply Voltage (*) (Note3, Note4) VCC 4.5 5 5.5 V
Note: Recommended operating conditions are given as a design guideline to obtain expected performance of the
device. Additionally, each item is an independent guideline respectively. In developing designs using this
product, please confirm specified characteristics shown in this document.
(*) This item denotes operating ranges, not meaning of recommended operating conditions.
TLP716
2014-09-01 3
The correlation between input current and switching speed and drive circuit
(reference information)
Input Current
(I
F
)
TEST CIRCUIT Typical Switching Speed
12mA
1
(Page 4)
14 – 16 MBd
8mA
1
(Page 4)
11 – 13 MBd
8mA
2
(Page 4, with Speed up capacitor)
16 – 20 MBd
Note 1: Pulse width PW≤1μs, 300pps.
Note 2: Device Considered a two terminal device: pins 1, 2 and 3 shorted together and pins 4, 5 and 6 shorted
together.
Note 3: The detector of this product requires a power supply voltage (V
CC
) of 4.5 V or higher for stable operation. If
the V
CC
is lower than this value, an I
CC
may increase, or an output may be unstable. Be sure to use the
product after checking the supply current, and the operation of a power−on/−off.
Note 4: A ceramic capacitor (0.1 μF) should be connected from pin 6 to pin 4 to stabilize the operation of the high
gain linear amplifier. Failure to provide the bypassing may impair the switching property. The total lead length
between capacitor and coupler should not exceed 1 cm.
Electrical Characteristics
(Unless otherwise specified, Ta=−40 to 100°C, V
CC
=4.5~5.5V)
CHARACTERISTIC SYMBOL CONDITION MIN TYP. * MAX UNIT
Input Forward Voltage V
F
I
F
=10mA, Ta=25°C — 1.65 1.8 V
Temperature Coefficient
of Forward Voltage
∆V
F
/∆Ta I
F
=10mA
—
−2.0 — mV/°C
Input Reverse Current I
R
V
R
=5V, Ta=25°C
— —
10 μA
Input Capacitance C
T
V=0V, f=1MHz, Ta=25°C
— 45
— pF
Logic Low Output Voltage V
OL
I
OL
=1.6mA, I
F
=12mA, V
CC
=5V
— —
0.4 V
Logic High Output Voltage V
OH
I
OH
=−0.02mA, V
F
=1.05V, V
CC
=5V
4.0
— —
V
Logic Low Supply Current I
CCL
I
F
=12mA
— —
5.0 mA
Logic High Supply Current I
CCH
V
F
=0V
— —
5.0 mA
Input Current Logic Low
Output
I
FHL
I
O
=1.6mA, V
O
<0.4V — — 6.5 mA
Input Voltage Logic High
Output
V
FLH
I
O
=−0.02mA, V
O
>4.0V 0.8
— —
V
*All typical values are at Ta=25°C, V
CC
=5V, I
F(ON)
=12mA unless otherwise specified
Isolation Characteristics
(Ta = 25°C)
CHARACTERISTIC SYMBOL TEST CONDITION MIN TYP. MAX UNIT
Capacitance input to output C
S
VS = 0V , f = 1MHz (Note 2) ― 0.8 ― pF
Isolation resistance R
S
R.H. ≤ 60%, V
S
= 500V (Note 2) 1×10
12
10
14
― Ω
Isolation voltage BV
S
AC, 1 minute 5000 ― ―
V
rms
AC, 1 second, in oil ― 10000 ―
DC, 1 minute, in oil ― 10000 ― Vdc
P1-P3P4-P6

TLP716(TP,F)

Mfr. #:
Buy TLP716(TP,F)
Manufacturer:
Toshiba
Description:
High Speed Optocouplers IC cplr IPM drive IFHL=6.5mA
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet