CUSTOMER DRAWING
TITLE:
PCB TERMINATOR
Unless otherwise specified dimensions are in millimeters.
[Inches dimensions are shown in brackets]
DIMENSIONING AND TOLERANCING PER ASME
Y14.5-2009
Raychem
Devices
DOCUMENT NO.:
D-607-10
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS
IN MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
REV:
H
DATE:
September 20, 2012
PREPARED BY:
RODRIGUEZ
CAGE CODE:
06090
ECO NUMBER:
ECO-12-016931
SCALE:
NTS
SIZE:
A
SHEET:
1 of 1
© 2007-2012 Tyco Electronics Corporation. All rights reserved.
If this document is printed it becomes uncontrolled. Check for the latest revision.
1) Shield may be folded back over jacket to increase diameter.
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene
fluoride.
2. SOLDER PREFORM WITH FLUX:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
3. TERMINATOR BODY BASE METAL: Copper alloy.
Plating: Tin lead solder per SAE Specification AMS-P-81728.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for
125qC minimum, meeting the dimensional criteria listed, having tin, or silver plated copper shields.
2. Temperature range: -55qC to +150qC. Install using Raychem-approved convection or infrared tools in
accordance with TE Connectivity assembly procedure ES-61139.
For best results, prepare the cable as shown:
Product Dimensions Cable Dimensions
Product
Name
L
max
øA
min
øB
min
øD
øE
1
D-607-10 24.0
(0.945)
4.0
(0.155)
2.8
(0.110)
1.8 to 4.0
(0.070 to 0.155)
1.9 to 2.8
(0.075 to 0.110)
