OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

EV1HMC244AG16

P1-P3P4-P6
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
SWITCHES - MULTI-THROW - SMT
3
HMC244AG16
v02.0116
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 4 GHz
Absolute Maximum Ratings
Bias Voltage Range (Port Vdd) +7.0 Vd c
Control Voltage Range (A & B) -0.5V to Vdd +1 Vdc
Channel Temperature 150 °C
Thermal Resistance
(Insertion Loss Path)
171 °C/ W
Thermal Resistance
(Terminated Path)
332 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Maximum Input Power
Vdd = +5 Vdc
+20 dBm (0.05 - 0.5 GHz)
+27 dBm (0.5 - 3.5 GHz)
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Bias Voltage & Current
Vdd Range= +5 Vdc ±10%
Vdd (Vdc) Idd (Typ) (mA) Idd (Max) (mA)
+5 3 7.0
+3 7 7.0
TTL/CMOS Control Voltages
State Bias Condition
Low 0 to +0.8 Vdc @ 0.5 µA Typ.
High +2.0 to +Vdd @ 70 µA Typ.
Truth Table
Control Input Signal Path State
A B RF COM to:
Low Low RF1
High Low RF2
Low High RF3
High High RF4
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
SWITCHES - MULTI-THROW - SMT
4
HMC244AG16
v02.0116
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 4 GHz
Outline Drawing
1. PACKAGE MATERIAL: ALUMINA LOADED
BOROSILICATE GLASS.
2. LEAD, BASE, COVER MATERIAL:
KOVAR™ (#7052 CORNING).
3. PLATING: ELECTROLYTIC GOLD
50 MICROINCHES MIN., OVER ELECTROLYTIC
NICKEL 75 MICROINCHES MIN.
4. DIMENSIONS ARE IN INCHES [MILLIMETERS].
5. TOLERANCES: ±.005 [0.13] UNLESS
OTHERWISE SPECIFIED.
6. ALL GROUND LEADS AND GROUND PADDLE
MUST BE SOLDERED TO PCB RF GROUND.
Pin Descriptions
Pin Number Function Description Interface Schematic
1, 3, 5, 10, 12,
13, 14, 16
GND
Package bottom has exposed metal paddle that must also
be connected to PCB RF ground.
2, 4, 9, 11, 15
RF4, RF3, RF2,
RF1, RFC
These pins are DC coupled and matched to 50 Ohms.
Blocking capacitors are required.
6 Vdd Supply Voltage +5 Vdc ±10%
7 B See truth table and control voltage table.
8 A See truth table and control voltage table.
For price, delivery, and to place orders: Analog Devices, Inc., One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
SWITCHES - MULTI-THROW - SMT
5
HMC244AG16
v02.0116
GaAs MMIC SP4T NON-REFLECTIVE
SWITCH, DC - 4 GHz
Evaluation PCB
The circuit board used in the application should be
generated with proper RF circuit design techniques.
Signal lines at the RF port should have 50 ohm
impedance and the package ground leads and
package bottom should be connected directly to
the ground plane similar to that shown above. The
evaluation circuit board shown above is available
from Analog Devices upon request.
Item Description
J1 - J5 PCB Mount SMA RF Connector
J6 - J8 DC Pin
C1 - C5 330 pF Capacitors, 0402 Pkg.
U1 HMC244AG16 SP4T Switch
PCB
[2]
103137 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
List of Materials for Evaluation PCB EV1HMC244AG16
[1]
P1-P3P4-P6

EV1HMC244AG16

Mfr. #:
Buy EV1HMC244AG16
Manufacturer:
Analog Devices Inc.
Description:
RF Development Tools EVALUATION PCB ASSEMBLY
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet