NLAS5157
http://onsemi.com
2
PIN DESCRIPTION
PIN # Name Direction Description
1 IN Input Control Input Select Line
2 V
CC
Power Voltage Supply
3 COM I/O Common Signal Line
4 NC I/O Normally Closed Signal
Line
5 GND Power Ground
6 NO I/O Normally Open Signal Line
TRUTH TABLE
Control Input Function
L NC Connected to COM
H NO Connected to COM
MAXIMUM RATINGS
Symbol Pins Rating Value Condition Unit
V
CC
V
CC
Positive DC Supply Voltage 0.5 to +5.5 V
V
IS
NO, NC, or
COM
Analog Signal Voltage −0.5 to V
CC
+ 0.5 V
V
IN
IN Control Input Voltage −0.5 to +5.5 V
I
IS_CON
NO, NC, or
COM
Analog Signal Continuous Current $300 Closed Switch mA
I
IS_PK
NO, NC, or
COM
Analog Signal Peak Current $500 10% Duty Cycle mA
I
IN
IN Control Input Current $20 mA
T
STG
Storage Temperature Range −65 to 150 °C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
RECOMMENDED OPERATING CONDITIONS
Symbol Pins Parameter Value Condition Unit
V
CC
V
CC
Positive DC Supply Voltage 1.65 to 4.5 V
V
IS
NO, NC, or
COM
Analog Signal Voltage GND to V
CC
V
V
IN
IN Control Input Voltage (OVT) Overvoltage
Tolerance
GND to 4.5 V
T
A
Operating Temperature Range −40 to +85 °C
t
r
, t
f
Input Rise or Fall Time
20 V
CC
= 1.6 V − 2.7 V
ns/V
10 V
CC
= 3.0 V − 4.5 V
Minimum and maximum values are guaranteed through test or design across the Recommended Operating Conditions, where
applicable. Typical values are listed for guidance only and are based on the particular conditions listed for each section, where
applicable. These conditions are valid for all values found in the characteristics tables unless otherwise specified in the test conditions.
ESD PROTECTION
Pins Description Minimum Voltage
All Pins Human Body Model 7 kV