OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

NCV2252SN2T1G

P1-P3P4-P6P7-P9P10-P12
© Semiconductor Components Industries, LLC, 2011
June, 2018 − Rev. 5
1 Publication Order Number:
NCS2250/D
NCS2250, NCV2250,
NCS2252, NCV2252
Comparator, High Speed,
50 ns, Low Voltage,
Rail-to-Rail
The NCS2250 and NCS2252 low voltage comparators feature fast
response time and rail−to−rail input and output. The extended
common mode input voltage range allows input signals 200 mV above
and below the rails, allowing voltage detection at ground or the supply.
A propagation delay of 50 ns with a 100 mV overdrive makes this
comparator suitable for applications requiring faster response times.
These single channel devices are available with a complementary
push−pull output in the NCS2250 or with an open drain output in the
NCS2252. Both options are offered in TSOP−5 (SOT23−5) and
SC−88A (SC70−5) packages. Automotive qualified devices are also
available, denoted by the NCV prefix.
Features
• Propagation Delay: 50 ns with 100 mV Overdrive
• Rail−to−rail Input: V
SS
− 200 mV to V
DD
+ 200 mV
• Supply Voltage: 1.8 V to 5.5 V
• Supply Current: 150 μA Typical at 5 V Supply
• Available with Push−pull or Open Drain Output
• Packages: TSOP−5 (SOT23−5) and SC−88A (SC70−5)
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These Devices are Pb−free, Halogen Free/BFR Free and are RoHS
Compliant
Applications
• Voltage Threshold Detector
• Zero−crossing Detectors
• High−speed Sampling Circuits
• Logic Level Shifting / Translation
• Clock and Data Signal Restoration
End Products
• Automotive
• Lighting
• Smartphones, cell phones
• Portable and battery−powered systems
• Power supplies
www.onsemi.com
TSOP−5
(SOT23−5)
CASE 483
See detailed ordering and shipping information on page 2 o
f
this data sheet.
ORDERING INFORMATION
MARKING DIAGRAMS
SCALE 2:1
1
5
SCALE 2:1
SC−88A
(SC70−5)
CASE 419A−02
XX MG
G
XX = Specific Device Code
A = Assembly Location
Y = Year
W = Work Week
M = Date Code
G = Pb−Free Package
(Note: Microdot may be in either location)
1
5
XX AYWG
G
PIN DIAGRAM
1
2
34
5
OUT
VSS
IN+ IN−
TSOP−5 (SOT23−5) and
SC−88A (SC70−5) pinout
VDD
NCS2250, NCV2250, NCS2252, NCV2252
www.onsemi.com
2
Table 1. ORDERING INFORMATION
Automotive
Output Device (Note 1) Package Marking Shipping †
No Push−Pull
NCS2250SQ2T2G SC−88A (SC70−5) 5C 3000 / Tape & Reel
NCS2250SN2T1G TSOP−5 (SOT23−5) 5A 3000 / Tape & Reel
Open Drain
NCS2252SQ2T2G SC−88A (SC70−5) 5F 3000 / Tape & Reel
NCS2252SN2T1G TSOP−5 (SOT23−5) 5D 3000 / Tape & Reel
Yes Push−Pull
NCV2250SQ2T2G SC−88A (SC70−5) 5C 3000 / Tape & Reel
NCV2250SN2T1G TSOP−5 (SOT23−5) 5A 3000 / Tape & Reel
Open Drain
NCV2252SQ2T2G SC−88A (SC70−5) 5F 3000 / Tape & Reel
NCV2252SN2T1G TSOP−5 (SOT23−5) 5D 3000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specification Brochure, BRD8011/D.
1. Contact local sales office for more information.
Table 2. PIN DESCRIPTION
Name
Type Description
V
DD
Power Positive supply pin. Connect to positive rail. A bypass capacitor of at least 0.1 μF is
recommended as close as possible to the V
DD
pin
V
SS
Power Negative supply pin. Connect to ground or negative rail. If not connected to ground,
a bypass capacitor of at least 0.1 μF is recommended as close as possible to the V
SS
pin
OUT Output Output pin. NCS2250 has a complementary push−pull output stage. NCS2252 has an open
drain output stage which requires an external pull−up resistor
IN− Input Inverting input
IN+ Input Non−inverting input
NCS2250, NCV2250, NCS2252, NCV2252
www.onsemi.com
3
Table 3. ABSOLUTE MAXIMUM RATINGS (Note 2)
Rating
Symbol Value Units
Supply Voltage Range (V
DD
− V
SS
) V
S
0 to 6 V
Input Voltage Range V
IN
V
SS
− 0.3 to V
DD
+ 0.3 V
Output Voltage Range V
O
V
SS
− 0.3 to V
DD
+ 0.3 V
Output Short Circuit Current (Note 3) I
SC
Continuous mA
Maximum Junction Temperature (Note 4) T
J(max)
+150 °C
Storage Temperature Range Tstg −65 to +150 °C
ESD Capability (Note 5)
Human Body Model
Machine Model
HBM
MM
2000
50
V
Latch−up Current (Note 6) I
LU
100 mA
Moisture Sensitivity Level (Note 7) MSL Level 1
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
2. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
3. Applies to both single−supply and split−supply operation. Continuous short circuit operation at elevated ambient temperature can result in
exceeding the maximum allowed junction temperature of 150°C. Output currents in excess of ±50 mA over long term may adversely affect
reliability.
4. See APPLICATION INFORMATION for Safe Operating Area.
5. This device series incorporates ESD protection and is tested by the following methods:
− ESD Human Body Model tested per JEDEC standard JESD22−A114 (AEC−Q100−002)
− ESD Machine Model tested per JEDEC standard JESD22−A115 (AEC−Q100−003)
6. Latch−up Current per JEDEC standard JESD78.
7. Moisture Sensitivity Level tested per IPC/JEDEC standard J−ST−020A.
Table 4. THERMAL INFORMATION
Parameter
Symbol Package
Single Layer Board
(Note 8)
Units
Junction−to−Ambient
Thermal Resistance
q
JA
TSOP−5 (SOT23−5) 150
°C/W
SC−88A (SC70−5) 162
8. Values based on a single layer 1S standard PCB with 1.0 oz copper and a 50 mm
2
copper area.
Table 5. OPERATING RANGES (Note 9)
Parameter
Symbol Min Max Units
Power Supply Voltage V
S
1.8 5.5 V
Input Common Mode Voltage Range V
CM
V
SS
– 0.2 V
DD
+ 0.2 V
Ambient Temperature T
A
−40 125 °C
9. See APPLICATION INFORMATION for Safe Operating Area.
P1-P3P4-P6P7-P9P10-P12

NCV2252SN2T1G

Mfr. #:
Buy NCV2252SN2T1G
Manufacturer:
ON Semiconductor
Description:
Analog Comparators SINGLE OPEN DRAIN OUTPUT
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet